Change rake on Honda ATC 70

[ratedxbrad5318]

Im trying to fit a 190cc motor in my ATC 70... I need to increase the rake to make clearance. whats the best way to do this???

[hoosierlogger]

I would just stretch the frame instead of bending it to change the rake. I stretched mine 2 1-2" to fit the 140 in it.

[muthey]

are you sure the 70 frame will handle a 190cc motor, there is the option of using a 90 or 110 frame as well and putting 70 wheels on it. I know there is a 70 out there with a 250r motor in it but I seem to remember he did a ton of mods to the frame to brace it for the torque as well. Anyway if you do decide to use a 70 frame and change the rake document it and take lots of pics so others can see what improvements and things you could change to improve.

[tri again]

Yeah, some vids on here from Austalia with tiny trikes and huge horsepower.
I should try to find that again.

[KASEY]

here is the best way to gain clearance ,, +3 frame stretch,, it is sleeved 3 inches on bothsides inside for great strength ,, PM for details I have several different sizes in stock.

http://i1141.photobucket.com/albums/n592/KASEYII/70frame.jpg

[22LB]

You still have the 70 sleeves

[big specht]

Ramp it about 20 feet and the engine will eather fit real good or you will need new forks

[a0gambo]

here is the best way to gain clearance ,, +3 frame stretch,, it is sleeved 3 inches on bothsides inside for great strength ,, PM for details I have several different sizes in stock.

http://i1141.photobucket.com/albums/n592/KASEYII/70frame.jpg


Are there any sleeves available. I want To stretch mine 70 3"