350x headlight on 250r

[Brclark11]

I am thinking about putting one of my spare 350x headlights on the 250r of mine. I am extremely good at wiring. I know i can just wire one headlight up and have one working headlight, but what would happen if I splice the lines and wire both up to the 250r wiring harness? Any thoughts on good or bad idea?

[Flyingw]

You should be fine

350X Lighting Coil 200W max
Headlight 36.5W/35W X2
Tail Light 5W
Total Load = 148W

250R Lighting Coil 159W max
Headlight 60/55w (115W total)
Tail Light 5W
Total Load 120W

Bottom Line, if you put a 350X light on a 250R, you have an excess of 11 watts with all lights on.

[Redneckcustoms]

That ia what's on mine. I have tried to post a thread asking for help but it's up for a mod ti look at it or something. I have no power on the yellow wire. Not to hijack a thread but can someone help me out here? Bad stator? Can I test the little box that's under the tank?

[Flyingw]

What trike redneck?

[Flossyb20]

Should be fine, that's how Honda did it...if you pull back the switch harness on the 350x you'll see they just ran the wires in parallel.

[Redneckcustoms]

Ill try to start a thread again flyingw

[Redneckcustoms]

Can't start a thread...
http://i604.photobucket.com/albums/tt128/redneckcustoms13/photobucket-64315-1389453718708.jpg
http://i604.photobucket.com/albums/tt128/redneckcustoms13/photobucket-64317-1389453720533.jpg
http://i604.photobucket.com/albums/tt128/redneckcustoms13/photobucket-61127-1389453716842.jpg