200x

[Beau]

just bought this thing the other day paid 60 for it.
probably needs the motor rebuilt. not froze but kinda hard to kick im 6'2" 235 i would think i could easily turn this thing over.
needs the plastics and the seat recovered. frame and tank look ok. maybe some minor wiring.
is 60 an ok price for this or did i over pay.

next does anyone know anyone or anyplace near san antonio, tx that does good work on these motors.

[oldskool83]

You can't but a single peice of the bike for $60. I have $6000 into mine. You prob have a high compresion 10.25:1 top end. Those are harder to kick over. Post pics. if you can. You can sent you seat to two members on here who recover them, and maier makes new plastics all day long. There are some pitfalls to these bikes and motors but depending on your budget I am not sure if you want to even talk about them. Once they are fixed the bikes can be very fun. Here is my not so stock built X.

You need to do your own motor, these are not hard. You should have your kicker gears back cut. most shops will not touch old motors nor know whats needed for them. You might be better to send it out to a member on here like shortline who will rebuild it right the 1st time. He does good work and rebuild my head with new valve and guides and porting work, also I sent him my 84R forks to rebuild also.

[Beau]

You can't but a single peice of the bike for $60. I have $6000 into mine. You prob have a high compresion 10.25:1 top end. Those are harder to kick over. Post pics. if you can. You can sent you seat to two members on here who recover them, and maier makes new plastics all day long. There are some pitfalls to these bikes and motors but depending on your budget I am not sure if you want to even talk about them. Once they are fixed the bikes can be very fun. Here is my not so stock built X.

You need to do your own motor, these are not hard. You should have your kicker gears back cut. most shops will not touch old motors nor know whats needed for them. You might be better to send it out to a member on here like shortline who will rebuild it right the 1st time. He does good work and rebuild my head with new valve and guides and porting work, also I sent him my 84R forks to rebuild also.

what did you do to spend 6k. i really just want it to look nice and run forever. i plan on painting the frame myself. doing the motor work scares me a little as i dont want to just throw money out the window. but if its easy and rather inexpensive im game.

[oldskool83]

my bike only looks like a 200x lol

1. 1982 Honda atc250r durablue 2+2 axle ($562)
2. HREatv.com Modified durablue sprocket hub for trx250x/300ex/400ex/250r/450r rear sprockets (Can't give out)
3. 1983 Honda atc250r rear shock rebuilt (machined top bushing to 200x spec. machined galvanized sleeve spacer with grease
channel) ($500)
4. 1985 Honda atc250r front headlight assembly and straps ($65)
5. 1985 Maier Honda atc250r headlight bezel ($65)
6. 1984 Honda atc250r forks rebuild with progressive springs 10weight oil ($250)
7. 1985-86 Maier Honda atc250r front fender ($75)
8. 1983-85 Maier Honda atc200x rear fender ($180)
9. HREatv.com 1984 atc200x gusseted frame labeled 1986 atc350x vin # w/ title/PA- DCNR plat, 04-05 trx450r grab bar and oil
cooler mounts. (can not give out cost) ($75 to title in my name)
10. Vesrah full engine gasket kit ($40)
11. Vesrah valves ($50)
12. Modified OEM rear fender brace bracket for rubber mounted application ($20)
13. 10.25:1 weisco complete rebuilt motor ($750)
14. Rebuilt head and ported/polished ($120)
15. 2002 XR200 carb rebuild ($100)
16. 1984 atc250r front caliper rebuild and painted ($135)
17. HREatv.com custom rear foot brake pedal assembly (can't give out price)
18. 1986 atc200x front hub powder coated red with all balls bearings ($125)
19. 1984 atc200x front rotor ($15)
20. 1983-84 atc250r EBC rear rotor ($100)
21. HREatv.com +2 atc200x swing arm to accept 1983 atc250r rear shock, 2013 trx450r rear caliper mounts with 99+ trx400ex skid
plate mounts and 99+ trx400ex chain guide (can't give out price)
22. 1999+ trx400ex Pro Armor .250” alum skid plate modified to custom swing arm ($140)
23. 83-85 atc200x custom dogbone with lowered shock mount for 83 atc250r shock (can't give out price)
24. DID cam chain ($20)
25. Blast and coat motor ($150)
26. OEM engine seals ($75)
27. Clutch lifter plate bearing ($15)
28. OEM crank bearings and wrist bearing ($100)
29. OEM cam chain guides ($75)
30. Cosmic Quads.com custom red zebra 200x seat cover ($150)
31. IMS plastic red short tract tank ($275)
32. Red 83-85 atc200x maier super tank scoops ($45)
33. 200x clutch case modified for oil cooler ports ($25)
34. Motion pro 200x clutch cable ($15)
35. Motion pro 200x throttle cable ($15)
36. Uni air filter 200x ($25)
37. 2005 trx450r oil cooler with modified oil port lines ($60)
38. EBC heavy duty clutch plates ($30)
39. EBC heavy duty clutch springs ($15)
40. EK 520 x-ring chain ($135)
41. Custom 10x5 atc250r front rim (ATV front tire size to run new style tires) ($150)
42. LTR450 18x10x8 oem wheels and tires ($165)
43. GBC X-Rex 23x7 front tire ($75)
44. OEM 1986-02 Honda xr200r cam ($100)
45. OEM swing arm axle bearings & seals ($90)
46. Delrin swing arm bushings ($25)
47. JT 12T front sprocket ($25)
48. Sun star 38T steel 450r rear sprocket ($40)
49. 2013 trx450r rear caliper and block off plate ($100)
50. Custom yz426f exhaust with turndown cut in half from modified for below header ($75)
51. 83-85 atc200x cobra head pipe ($75)
52. New exhasut studs ($10)
53. OEM 83-85 200x gear shifter with knurled toe shifter sleeve (Can't give that price)
54. 04 trx450r twist off rear brake reservoir ($15)
55. K&K leager/burgard delrin trx400ex chain slider (HRE modified) ($40)
56. YZ85 black shorty ASV levers ($140)
57. Custom stainless steel braided brake lines ($50)
58. Protaper CR mid bend bars ($55)
59. Scott atv grips and glue ($15)
60. All bolts and nuts replaced ($150)
61. New cylinder head spacers ($10)
62. New clutch lever sprindle ($45)
63. CDI pulser assembly ($45)
64. New valve cover washer and nuts ($22)
65. 200x kickstarter back cut gears and spacer kit ($60)
66. OEM chain chain adjusters with not oem hardware to adjust ($40)
67. New non oem 250r/200x axle spacer collar for inside of swingarm ($10)
68. New 200x kil switch ($60)
69. HREatv.com billet motor spacers (can't give that price out)
70. 04-05 trx450r AC wide grab bar ($70)

$6774

I know HRE for many years now so my prices might differ from people not knowing him or having access to the shop so that's why I have told him I will not give out his prices on this forum. For prices you can contact him. Many of my bikes parts are listed on this website and are able to be remade as production replacement parts. There costs of parts I bought never used or didn't work like the grand I had into my yz85 inverted front end plus the odds and end parts I didn't keep recipts to.

I got 2 200xs 400each running beat and redid 1 nice one. I might of got $1000 out of selling parts between them both.

I suport a full 10" shock travel and many custom parts, I build a new 200x but made it look old. It's works pretty good, rides and feels like 250R which is what I was after.

[dmfaulks85]

For $60 you pretty much stole that thing regardless of the price, they are a great machine. As far as tearing into the engine goes just buy a service manual, they are worth their weight in gold.

[Beau]

For $60 you pretty much stole that thing regardless of the price, they are a great machine. As far as tearing into the engine goes just buy a service manual, they are worth their weight in gold.

will a 250x motor bolt in. any special mods to make to get it to bolt in. i have been considering taking my chances with one on ebay that they claim runs. i have seen them for 300 shipped which seems pretty reasonable. what does it cost to rebuild one. i dont think the motor is locked up as it will turn over half way then stops. can even hear the air coming out of exhaust. maybe a bent valve. im not sure havent got the motor that far apart yet.. are there any upgrades to make to make it better than stock like taking parts from a 250 or 300x that fit without mods?

[sledcrazyinCT]

so do you know the year of your 200x?

[Beau]

so do you know the year of your 200x?

it is a 1985 model

[Rkillin]

I work on three wheelers in San Antonio. My number is (210)723-9082. If nothing else, maybe we can get some folks together to do some riding.

[rdonald1979]

oldskool83 your a rare man to put that much into a 200x. Extremely nice machine.

[86125m]

don't tare anything apart until you know for shore that it does not run you will be surprised what you can get running.

[wpginterceptor]

these 200x's are they 4 stroke or 2? do they use a clutch? are they a lot faster than a regular 185S or atc 200?

[Ninja Greg]

haha.. its not hard at all to spend huge money on these machines... i have a 350X with almost 4k into it and haven't done anything real special... couple small mods like 400ex carb swap and semi-custom exhaust.. the rest was purchase price and small parts to just make it all the better.. good luck, because you'll end up getting the addiction too!! lol

heres my addiction..
194083

[Sand Runner]

4 Stroke, Yes, and Yes.

The 200X was Honda's answer to the "sport" 3 wheeler of the day. Can not be compared to the old 185's and 200's. A closer comparison is to a XR200 dirt bike which has almost the same engine.

[Sand Runner]

OK, now let's help Beau with his 60.00 USD 220X.

Beau, as mentioned above, do not even consider an engine swap until you have determined if the engine you have can be made to run.

First, pull the spark plug and check for spark.

Second, check for engine compression. You can borrow a compression gauge from most automotive stores. If the machine has been sitting, check compression both dry and wet (small amount of oil).

Third, if you have spark and compression, try putting a small amount of gas in the cylinder, put the plug back in and see if the bike will fire.

Forth, if it coughs, you probably has a carburetor problem which is common for bike that have been sitting.

If no spark or compression, repost and members can help you find possible causes.

Old 200X's never die. They are either rebuilt or are disassembled and sold off part by part.

[Beau]

motor wont turn over. i have pulled the motor from the bike and got stopped after i pulled it as the rear mounting bolt was sheared off on one end and bent on the other so i cant get it out of the motor.
i have since dropped off my 2 70's at a mechanic to get those running.
when those are done i am going to focus on my 200es as that motor runs but needs a tank and throttle cable to be drivable.
then the 200x is my next project.
cant wait to get these things running.




OK, now let's help Beau with his 60.00 USD 220X.

Beau, as mentioned above, do not even consider an engine swap until you have determined if the engine you have can be made to run.

First, pull the spark plug and check for spark.

Second, check for engine compression. You can borrow a compression gauge from most automotive stores. If the machine has been sitting, check compression both dry and wet (small amount of oil).

Third, if you have spark and compression, try putting a small amount of gas in the cylinder, put the plug back in and see if the bike will fire.

Forth, if it coughs, you probably has a carburetor problem which is common for bike that have been sitting.

If no spark or compression, repost and members can help you find possible causes.

Old 200X's never die. They are either rebuilt or are disassembled and sold off part by part.

[Beau]

you have my 2 70's. just dropped them off to you.

[Homeygrown]

oh man!!! I got mine for free!!! I picked it up with a nice original gas tank, an extra frame(powdercoated) newly covered seat and all the plastic... Just rebuilt my motor, if I can do it anyone can!!! New piston and rings, new gaskets, cam shaft and some other small stuff.... She fired right up!!!! Still need tires. any suggestions on those??? ADDICTION isnt even the word.... OBSESSION is more like it!!!