1985 200x kick start ??

[Mudduck]

how deep do i have to go to replace the return spring i have the new spring can i do it with clutch cover off or do i need to go deeper lol

[hatc200x1]

You have to completely tear down the motor. Meaning you have to pull the top end, pull the crankcase covers off and then split the cases. Here is a manual that has step by step instructions with pictures. Its not a bad job if you know what your doing. Im 15 and I did it, its easy. This site also has alot of other manuals. Hope this helps.
http://www.oscarmayer.net/atc/manuals/

[tri again]

Really?
case split?
Maybe I should just sell mine?
I have a perfect small hill so I jumpstart

[Mudduck]

i thought so thanks i can handle it. i have the parts lol but dont feel like doing it lol but i went out yesterday an the stupid thing doesnt want to stay up
185617185618185619185620185621185622185623

[hatc200x1]

If you have the parts and you have the manual next to you it will take about a day for a slow mechanic to get the engine out of the frame, tear it down, and assemble it and put it in the trike.

tri again: Yes you need to split the cases. Why would I be joking about that? Its not that bad the manual shows how to do it and its fun to learn and what not.

[Ytm_225dx]

Tri again if you really wanna sell it let me know a price

[YTZ drew]

The first set of cases I ever split were on a CL125 Honda (basically same bottom end as a 200X), they are fairly easy, you just need an impact driver for the phillips screws, a spanner socket for the crank nut, and some patience.