ATC 200 fork question

[Dansatc]

I have an 81 ATC 200 can you swap the 200s forks on to it and if so what would I need. Are the front wheels and axle the same?

[hatc200x1]

Yes you can put 200S forks on your 200. To do this you will need the 200S front axle, forks, and steering stem/triples. I would also get new steering stem bearings because you have to pull the old forks off and the Honda steering stem bearings are just balls in a race and they all fall out. It is just easier to get new steering stem bearings.
You can get the new steering stem bearings on ebay for about 25 dollars. And you should beable to get the front axle on there if not here.
Hope this helps. The old hub may work but I am not quite sure. They have slightly diffrent part numbers and yes your front wheel should bolt right up. When you have it all apart I would put in new front wheel bearings and seals.

[Dansatc]

Cool thank you for the info man appropriate it