Building strokred and bored 110's

[WILL_S]

Hi newby here

I am building a 110 stroker using a 58mm crank.
So far on this project i've got the crank and a 55mm piston.

http://i218.photobucket.com/albums/cc280/WickedWill_01/BIKE/RALLYE%20POSTIE%20BUILD/58mmstrokerbuild008.jpg (http://s218.photobucket.com/user/WickedWill_01/media/BIKE/RALLYE%20POSTIE%20BUILD/58mmstrokerbuild008.jpg.html)

http://i218.photobucket.com/albums/cc280/WickedWill_01/BIKE/RALLYE%20POSTIE%20BUILD/strokerpistons007.jpg (http://s218.photobucket.com/user/WickedWill_01/media/BIKE/RALLYE%20POSTIE%20BUILD/strokerpistons007.jpg.html)

I am after at least a 58mm or 61mm piston and barrel.

[WILL_S]

Here is another stroked and bore 110 i have built
Machined a atc125 crank to fit into a 110.
This allows no pull start and 12v cdi with a pick up in the cases and is single range.

http://i218.photobucket.com/albums/cc280/WickedWill_01/BIKE/RALLYE%20POSTIE%20BUILD/130mtrbuild017Small.jpg (http://s218.photobucket.com/user/WickedWill_01/media/BIKE/RALLYE%20POSTIE%20BUILD/130mtrbuild017Small.jpg.html)

http://i218.photobucket.com/albums/cc280/WickedWill_01/BIKE/RALLYE%20POSTIE%20BUILD/130mtrbuild038Small.jpg (http://s218.photobucket.com/user/WickedWill_01/media/BIKE/RALLYE%20POSTIE%20BUILD/130mtrbuild038Small.jpg.html)

[WILL_S]

Need to keep them cool
2 different ways of making oil cooler pickup plates
First i modified a stock plate

http://i218.photobucket.com/albums/cc280/WickedWill_01/BIKE/RALLYE%20POSTIE%20BUILD/OC009Small-1.jpg (http://s218.photobucket.com/user/WickedWill_01/media/BIKE/RALLYE%20POSTIE%20BUILD/OC009Small-1.jpg.html)

http://i218.photobucket.com/albums/cc280/WickedWill_01/BIKE/RALLYE%20POSTIE%20BUILD/OC012Small.jpg (http://s218.photobucket.com/user/WickedWill_01/media/BIKE/RALLYE%20POSTIE%20BUILD/OC012Small.jpg.html)


Passage blocked to redirect oil to cooler & the beginning of a custom pickup plate
http://i218.photobucket.com/albums/cc280/WickedWill_01/BIKE/RALLYE%20POSTIE%20BUILD/OC017Small.jpg (http://s218.photobucket.com/user/WickedWill_01/media/BIKE/RALLYE%20POSTIE%20BUILD/OC017Small.jpg.html)


Custom plate
http://i218.photobucket.com/albums/cc280/WickedWill_01/BIKE/RALLYE%20POSTIE%20BUILD/OC028Small.jpg (http://s218.photobucket.com/user/WickedWill_01/media/BIKE/RALLYE%20POSTIE%20BUILD/OC028Small.jpg.html)

[WILL_S]

Have i got 10 posts yet :lol:

Ok the completed motor with a breather outlet in clutch cover
atc125 barrel,head crank&piston 127cc

http://i218.photobucket.com/albums/cc280/WickedWill_01/BIKE/RALLYE%20POSTIE%20BUILD/126c002Small.jpg (http://s218.photobucket.com/user/WickedWill_01/media/BIKE/RALLYE%20POSTIE%20BUILD/126c002Small.jpg.html)

This one ended up cammed and 24mm carbed.Pulls real hard cam kicks somewhere near 5000 rpm and slingshots you.
I really like this engine .Now it's time to build the something bigger