BIGREDBEGINER
03-01-2014, 06:20 PM
today I put back my engine after a new front sprocket install. fired it up and the front sprocket didn't move. I had a problem with the sub trans gear and I put another one in it.The wheeler did engage when I purchased it so I have no clue what could be going on. The shifter seems tight and the neutral indicator doesn't move. I looked in the engine when I pulled off the covers to check the common problem with the 125s but I didn't see any damage but I only done a sight inspection. I only drove the wheeler a couple of feet when I got it.I did put a new carb on it and it runs but when I give it gas it seems to be like its in high gear tryin to take off no high revs can be made. I did hear a clinkin noise but as I stated the common shift problem with the stopper but I could stick my finger behind the gear and it wasn't loose and no broken pieces.Looks like it will be going to a shop it will still cost me time and tools that I don't have.:cry: