200M/E/ES Rack and Fender Thoughts

[thatguy]

So have a 200M with beat up plastic on the rear, both fenders, and no rack...

I read some prior posts and it looks like the E and ES rear racks will fit the M, but does the year make a difference? Should it be for the same year for E/ES/M?

Also, with the rear fenders.. will E and ES fenders fit the M as well?

Fenders for these are hard to find and not cheap from what I can find. My somewhat plan is to get a rack for the M and fasten fenders to the bottom of the rack, just so the rack helps suspend the fenders a little higher off the rear tires. They're cracked to hell but they have been repaired with zip-ties which I have to admit I kind of don't mind that look, resembles stitches from an injury. Might be a bit janky, but just want the fenders off the tires and at least to look more level from the rear...

If anyone has a, E/ES/M rear rack sitting in their garage, let me know how much!

[DasUberKraut]

I have a rack and fenders from an 82 ATC200.
Not sure if they will work for you. If they will. I will cut you a deal.

[bkvette3]

200ES fenders are the exact same as the 200M - bolts right up. I think (not sure though) the rear rack is the same for both. I just posted a 4 sale ad in the classified section for rear fenders from a 1984 200es. Also a front rack too. Check it out to see if they will work for you. BK3

[Chopsaw]

The 82 regular 200 is not the same . I think , but not for sure that 200es rear fenders will fit the M . I believe that the front fender , and rack are not the same , so you need to find a front set up that's made for the 200m .

[bkvette3]

The 82 regular 200 is not the same . I think , but not for sure that 200es rear fenders will fit the M . I believe that the front fender , and rack are not the same , so you need to find a front set up that's made for the 200m .

Hello Chopsaw - I put a pair of rear 1984 200M fenders on a 1984 200ES with no issues - all holes lined up. Regards, BK3

[MNhondaguy]

The 200e rack bolts up on the grab bar, and alongside the seat. Also thought the fenders to a brace bar that goes to the frame.

Also, if you stitch with zipties, don't just run one across, make an "X" with 2. It is much stronger and wont let the 2 mating plastic pieces overlap like they would if you just go across.

Oh and drill hole at end of crack to prevent spreading. Get creative, its fun when you need a few hundred zippies. Find a comfy stool, battery drill for ease of use, dykes, big ol' bag of zippies, and GO TO TOWN!!!

http://i1178.photobucket.com/albums/x377/guitarkid30/Mobile%20Uploads/image-54.jpg (http://s1178.photobucket.com/user/guitarkid30/media/Mobile%20Uploads/image-54.jpg.html)

[thatguy]

awesome! BKVETTE, for the life of my I can't find the classifieds section of this website!! What am I doing wrong? little help fellas?

[Chopsaw]

Hello Chopsaw - I put a pair of rear 1984 200M fenders on a 1984 200ES with no issues - all holes lined up. Regards, BK3

I was commenting on the 82 200 not being the same

[MRSOUND]

You won't see the classifieds until your a member 2 months. Part of new member rules. I think I may have a rear rack from a 200es I parted out if your interested I can check tomorrow. Let me know.

[thatguy]

You won't see the classifieds until your a member 2 months. Part of new member rules. I think I may have a rear rack from a 200es I parted out if your interested I can check tomorrow. Let me know.


that would be awesome! i wouldnt mind rust, just trying to stay awat from anything bent to hell. planning to paint it.. please check if you get a chance and quote me $ please sir!

[MRSOUND]

Found the rack....A bit torqued though. You can see in the pic it is bent left to right like it might have experienced a roll. But it it seems to only be in the front section. It would include 2 fender brackets and only has 1 of the 2 grab bar clamps. Does not have the section over the trunk either. $30 + the ride if you want to work with it. let me know.
189131189130189129

[bkvette3]

I was commenting on the 82 200 not being the same

Sorry, Chopsaw - my apologies. I guess I can't read. Regards. BK3

[bkvette3]

awesome! BKVETTE, for the life of my I can't find the classifieds section of this website!! What am I doing wrong? little help fellas?


Hello thatguy. First of all - welcome to the Forum. A lot of knowledgeable guys here who know ATCs' - good place to be.. PM sent to you on March 16th. BK3

[LucasGrys]

You can do both i have the 200e small rack on my 200M and it works if i felt like it I could put my es ones on!