Drive sprocket troubles. Please help

[Jeffreyd]

So I bought a 200e big red and while breaking down the motor, I noticed a bad weld job and a major crack refer to pics, not sure if they fu##ed it or not?

[yaegerb]

I am assuming that is an 83. Yes you are screwed. Not to worry though. You need part number 12 in the service honda fiche below.

http://www.servicehonda.com/parts/lookup#/Honda/ATC200E_A_%2883%29_ALL-TERRAIN_VEHICLE_%28ATV%29%2c_JPN%2c_VIN%23_JH3TB05 1-DC203548/TRANSMISSION/ATC200E-83-JPN-A/2Y18958CE18958C17A

Here is the part on Ebay:
http://www.ebay.com/itm/NOS-Parts-Unlimited-Countershaft-Drive-Sprocket-11T-ATC200-ATC-200-K22-25030-/371009873485?pt=Motorcycles_Parts_Accessories&hash=item5661e9664d&vxp=mtr

[Jeffreyd]

How easily does the sprocket come off the shaft? It's giving me some issues,

[yaegerb]

from what I can tell from the EBAY part picture it appears that the sprocket and sleeve are all 1 component. So just pull that sleeve/sprocket combo off, get the new part and voila, done.