Best mud tires for atc 110?

[Gwatson212]

What mud tires should I get for my atc 110? I'm getting new rims also. What kind should I get? Aluminum or steel?

[bigmac]

Idk about rims but get something that's wide and will float. The air box is very close to the rear axle so don't take it to deep! I would try to find some wooly boogers or rawhides I used to have a set of both I wish I still had. But for a more modern all out mud tire they make 26 outlaws I think or dirt devels or mud wolfs. U want something that will clean out.

[MotherTucker85]

ITP Mudlites

[atc007]

Buckshot mudders. Will also turn it into a snowmobile :)

[barnett468]

.
Howdy!

http://t3.gstatic.com/images?q=tbn:ANd9GcQxr9P5OYMQvRhaWZ5QfBVTS7isj4zCS JQ6Ku1TmxO1HY-ScDvHod7NuYM


RIMS – Unless you think you might bang them up, aluminum are fine and a bit lighter than steel.

TIRES - Well, your factory tire size is 16x8x7. The only tire specifically for heavy/deep mud I could find is the one below. It is also a 2 ply like the factory tires so it will bog your bike down a little less than a 6 ply and will have a slightly softer ride than a 6 ply if that matters at all. Two plies are slightly more susceptible to punctures than 4 and 6 ply but there are few choices in your size. Plus they're dirt cheap, only $36.00 each. The 9314 are rear and 9313 are fronts [but confirm with seller] AND they are made by Cheng Shin which is a very good tire mfg..

See prices here.

http://www.bikebandit.com/cst-c9313-c9314-atv-tire?b=3200398&utm_source=feed&utm_medium=merchantfeed&utm_campaign=pla&gclid=CPm0_vzHq74CFaYF7AodKlYACg

http://i.ebayimg.com/00/s/NjAwWDU3MA==/z/hGEAAOxy4t1Sjms6/$_1.JPG


Dirt cheap...
http://www.freesmileys.org/smileys/smiley-laughing025.gif (http://www.freesmileys.org/smileys.php)

[jb2wheels]

That is dirt cheap for a 70 tire.

[Gwatson212]

The tire size I have is 22x11x8 so it's not those barnett. I'm trying to choose between kenda bear claws that are 22x12x8 it gbc gators that are 22x11x8.

They are 8x 8 inch rims and the pattern is 4/130.

[barnett468]

The tire size I have is 22x11x8 so it's not those barnett. I'm trying to choose between kenda bear claws that are 22x12x8 it gbc gators that are 22x11x8.

They are 8x 8 inch rims and the pattern is 4/130.Holy cr_p, are riding in mud or quick sand, lol. It's better to run a wider rim on those tires but your not goin fast so not a big deal.

[Gwatson212]

I'm riding in mud. And some trails.

[Gwatson212]

Where would I get wider rims that are still 8 inches and have the 4/130 thread pattern. I have an aftermarket dg exhaust and I'm afraid that the new wider rims and tires will rub the exhaust.

[barnett468]

Where would I get wider rims that are still 8 inches and have the 4/130 thread pattern. I have an aftermarket dg exhaust and I'm afraid that the new wider rims and tires will rub the exhaust.hi

here's 8.5" wide with 3.5" backspace, so it hopefully will not move it in towards the inside anymore than it already is but you need to measure the backspace on your current rims.

https://www.denniskirk.com/ams/large-bell-steel-wheel.p551047.prd/551047.sku

[Gwatson212]

The backspace ok the ones I have is 3inches

[iTaylor]

The max tire size for a 110 is 26in. I personally have had great success with interco tsl/atv super swampers