84 200 es flywheel puller

[doughnuts]

Does anyone know if the threads on a honda 200 es flywheel is left hand or right hand threads--I need to know what kind of puller to get.
Thanks for any or all who reply.

[tvpierce]

Does anyone know if the threads on a honda 200 es flywheel is left hand or right hand threads--I need to know what kind of puller to get.
Thanks for any or all who reply.

You don't need a conventional puller for the flywheel on this engine. Just a standard, right-hand-thread 14mm x 1.5 thread pitch bolt. I was able to get one at my local ACE Hardware. The bolt threads into the flywheel, and pushes/pulls it off the crank.

[doughnuts]

Great, I will not have to buy a expensive tool to remove it--Thanks for a cheap fix--RIDE ON.