View Full Version : 81 250R motor Question
mattsoch
06-20-2014, 07:58 AM
Looks like i need to do a rebuild on my 81 250R. I done a bit of looking but there does not seem
to be much out there for rod kits or pistons. I have seen some Wisco kits but thats it. Not a big
fan of Wisco. Ive had some bad some issues with sleds.
Any help would be great.
90guy
06-20-2014, 09:16 AM
What size are you going in the piston? 66.25? You might be able to get a honda piston for it. As for rods. Might be able to find a honda rod. Or the other 2 choices appears to be Versah or Hot Rods.
manbearpig
06-20-2014, 09:35 AM
look up Wossner pistons if you dont like wiseco
yaegerb
06-20-2014, 09:49 AM
x2 on wossner
mattsoch
06-20-2014, 11:12 AM
I took a quick look and the piston was 69.5mm or so.
I was able to find the Wossner piston
I'm up in Canada and im being qouted $220 for the rod installed on the crank and $150 for the just the piston.
thanks
hatc200x1
06-20-2014, 11:30 AM
Wow, my local shop charges 65 for a crank rebuild, and 40 for a cylinder bore.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.