PDA

View Full Version : 125m carb settings



chuckyj95
06-29-2014, 08:53 AM
I took the carb apart to clean it and forgot to wright down where the 2 screws were. whats a good spot to start them at.

shortline10
06-29-2014, 10:06 AM
Air screw 2 turns out from the bottom .
Idle screw adjust it so the slide just starts to move and adjust again after start up .

chuckyj95
06-29-2014, 12:01 PM
Thanks it was the air screw that was my worrie thanks