View Full Version : 250es hub swap
Jmoozy27
09-30-2014, 03:58 PM
Will a 86 or 87 250es hub fit on my 85 differential and axle?
Jmoozy27
10-02-2014, 01:18 PM
Or will any other hub match with the 85 axle splines. My left hub is bent up pretty bad because of what I had to do to get it off of the axle.
Heat+puller+hammer=got it off
atc500x
10-02-2014, 10:40 PM
No,will not fit,85 is a model,86-7 is another one. You need the 85 model,no other will fit
muthey
10-03-2014, 03:13 AM
Correct me if I am wrong but won't an 85 250 sx hub also fit as well. other than the ring gear I believe the es and sx 85 's had very similar rear end
atc500x
10-03-2014, 07:32 AM
yes the sx 85 hub is the same, but not the 86-7
gearbox housing and hub are the only common part between 2 model,all other part are differents
atc007
10-03-2014, 07:47 AM
All correct,and also, the TRX won't work on 85. 86 - up only.
Jmoozy27
10-03-2014, 11:20 AM
What about the right side hub put on the left side? Would that work? I can find some right side hubs but the few left hubs are pricey. But I do need one.
atc007
10-03-2014, 11:25 AM
Totally different. You need the correct year and side to get fixed up:)
Jmoozy27
10-03-2014, 11:56 AM
Looks like I may have a parts bike in the making. Don't know what year yet.
Jmoozy27
10-03-2014, 12:16 PM
What about the bearings are the same. I just ordered some for the 85 diff and axle tubes. If the parts bike isn't an 85 would the bearing that I ordered work or do I need to cancel the order?
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.