hello i'am not new been around befor. but i have a few ?

[daddy420big]

right now i'am working on a 85 200x and trying to put a 200s motor in it been searching and all and what do you guys use for the rear brake pedal and i'am looking for parts to . thanks for the help

[atc300r]

I used a a 230 Quadsport rear brake pedal and 82 250r master cylinder.The brake pedal needs some grinding.

[daddy420big]

i'am looking for pics if you have any. and thanks for the help

[atc300r]

Heres a pic of my setup.205603

[daddy420big]

hey can i use a 350x pedal to ?

[atcryder250]

On my setup I used the stock 200s pedal just had to heat it up and put two bends in it. I'll post a pic when I can

[atcryder250]

Here is the magizine link for an auto X conversion with pictuers of the brake setup. My X is up in the high desert so I couldn't get pictures right away. My setup is very similar to this.

http://www.3wheelerworld.com/oldsite/files/MagScans/autox.pdf

Not sure if link works if not copy and paste in google and it will come up.

[ironchop]

hey can i use a 350x pedal to ?

I did on my son`s ride. We put a Lifan in his that I had laying around and I used a 350X rear brake pedal to get rid of the 200X linkage that we couldn`t use anymore.

IIRC, I had to cut the tab off the back of the pedal and reposition it a little to get the right angle in relation to the rear master.