PDA

View Full Version : yamaha tri z swingarm



Conz199
12-29-2014, 03:07 PM
hi

theres probably been a ton of posts about a swingarm for the tri z but im after a calfab one? maybe impossible to get?

or is there anybody out there making a decent light swingarm for the tri z at all?

thanks.

Conz199
12-29-2014, 04:08 PM
or even a westcoast swingarm? i did email motogp werks but the guy said it would be around $1500-1600 for one

cr480r
12-29-2014, 04:55 PM
What Is the intended use? Period correct restoration? Mx? Trail basher? Dunes/drag?

I had a calfab, thing had been cracked everywhere by a previous owner who lived near the dunes. If you found a nice one it would be a shame to actually use it. Where I live is a lot of mountainous timberland and dunes nearby. I have thought of modifying a round carrier banshee swingarm to fit a Z. Some of them are pretty light duty, but could be beefed up for more severe use.

Conz199
12-29-2014, 06:31 PM
Hi thanks for the reply I would only use it for mx I did. Have a quick look at modifying a banshee arm quite abit of work in it I imgine? My step dad made up a billet carrier with extenders that bolts on to the back of the tri z swingarm looks pretty good il get some pictures If I can an put then up are u is there any chance you could send me some piks of your calfab swingarm? An have you ever had a look at a westcoast swinger?

NeverLift
12-29-2014, 06:46 PM
http://metaltechproducts.com/Yamaha_Swingarm.htm

These guys make awesome swingarms. I know they don't list the Tri-z but they do make them.

http://www.3wheelerworld.com/showthread.php/161535-86-tri-z-all-finished

Rigaman has one on this Z

jeswinehart
12-29-2014, 07:01 PM
Poolie had one made that came to my house to forward on to him. A real gem it is !
http://www.clubatc.co.uk/forums/index.php?showtopic=4101&hl=

Conz199
12-29-2014, 07:19 PM
Thanks for the reply boys il check metal tech out and jeswinehart I didn't relise the uk had a club is there a lot of trike dudes on there?

Conz199
12-30-2014, 02:53 PM
Hi mate tried to email metal tech says the address is invalid on their site do you know an email address for them?

poolieZerUK
12-30-2014, 06:41 PM
Hello mate I will forward the contract details for Tyler at mtech pm me your email and I will send some more details I am doing this from my phone and its a bit of a pain

With whisky eyesight lol

oile
12-30-2014, 11:53 PM
206994 2069944[ATTACH=CONFIG]206994[/ATTACH ] Here's a Metal Tech swinger +4 for a z