Ytm 200 build.

[Yamawheeler]

Not to sure if this is suppose to go some where else but u thought everyone would enjoy this. I am in the process of rebuilding my 84 ytm 200 el. What I've got done so far.

[Yamawheeler]

http://tapatalk.imageshack.com/v2/15/02/21/03a6d8d47e9ee28a8b820de76194d6b3.jpg original look when I bought it.

http://tapatalk.imageshack.com/v2/15/02/21/e8d7aeb0e48bcefb223ca1bc5c93502d.jpg how it looked before tear down.

[Yamawheeler]

Double post deleted

[Yamawheeler]

http://tapatalk.imageshack.com/v2/15/02/22/2409461c9b67a8375f1bdf76d4e5bd7a.jpg sand blasted. Thanks to General sand blasting of Regina sk. Sorry bad pic old phone. Had dust in camera

[Yamawheeler]

http://tapatalk.imageshack.com/v2/15/02/22/a17513991788ba01665329ea8769fdb7.jpg extending main wires for key so they fit my high rise headlight.

[Yamawheeler]

http://tapatalk.imageshack.com/v2/15/02/22/0043426a80a174c6ee4f5a876ab43cae.jpg
http://tapatalk.imageshack.com/v2/15/02/22/5d91574470a7fff897e62c8e61419183.jpg
My painting racks hahaha

[fieldy]

That works! I like yellow and black paint jobs! Looking great! My paint racks usually grow out of the ground and have leaves on them. Old clothes line works good too!

[Yamawheeler]

http://tapatalk.imageshack.com/v2/15/02/23/7edb48a7095899d5b6d1801bf5a5f021.jpg
Painting the bars. Before picture. After to come.

[Yamawheeler]

http://tapatalk.imageshack.com/v2/15/02/23/b300a4d8460f2fd18cae64f4b33f4fd1.jpg
Seat before re-upholstery.

[El Camexican]

At first I thought that tube was for refueling without having to stop, like a fighter jet, but I see now its an air snorkel.;)

[Yamawheeler]

Yes. it was a wing it snorkel. turned out good. Has a sort of ram air effect. Best option I ever put on the ol'trike is the L.E.D light bar for my high beam.

[Yamawheeler]

http://tapatalk.imageshack.com/v2/15/03/03/f69bafc6ea56e4bcf9a321458ff0f0ed.jpg
Bars all black.

[Yamawheeler]

http://tapatalk.imageshack.com/v2/15/03/03/94f5ab1c7d218b29e2d239db284d6cf5.jpg
Finally putting it back together.

[mitchell1965]

This looks really good, i do have a question where are you gonna get new plastic....? or can you get any or do you modify

[Yamawheeler]

I'm going to try and get s plastics company to mold me some new ones if possible. And if not to pricey. But I'll prob just plastic weld and renew the plastic.

[Yamawheeler]

http://tapatalk.imageshack.com/v2/15/03/15/58e3c9ceb5f9e0b7a9fe8e5baf85f994.jpg
Hell yeh got some raptor 660 hubs on order. Hopefully they slide on my axle no problem. If they do 12" rims 27" tires here I come.

[Yamawheeler]

http://tapatalk.imageshack.com/v2/15/03/23/0ff6634c6b942e3a410a024741778444.jpg

[Yamawheeler]

http://tapatalk.imageshack.com/v2/15/03/23/b85ef2fed6be7187566de3e5e8a4c66a.jpg
Have to put on my winch and skid plate.

[muthey]

I have a set of unbroken rear plastics and a very pretty headlight shell for that machine, and the raptor hubs will go right on. with some of the yamaha hubs you have to make thin spacer sleeves to be able to bolt them down.

[Yamawheeler]

Thanks for the info. Can't wait for 12" rims and 27" mud bugs.

[Yamawheeler]

http://tapatalk.imageshack.com/v2/15/04/02/8e109f8fce1bfc34a428f34e30ebe7d4.jpg
Still waiting on parts for the engine swap. Can't wait.

[Yamawheeler]

Finally got the parts to send top end to shop. Been a long stressful wait. http://images.tapatalk-cdn.com/15/05/13/48f535ecaebd06d75e669bbbf58338e3.jpg

[Yamawheeler]

http://images.tapatalk-cdn.com/15/06/04/6b813cd3490e826d1d2d543dfc139f38.jpg
New exhaust.
http://images.tapatalk-cdn.com/15/06/04/cb5e5b6fc1d2f644e7cc16c6116be6aa.jpg
Rims and tires. Yehhhhhh buddddyyyy.
http://images.tapatalk-cdn.com/15/06/04/2a9416d05d5a9343c7f7a1b8268c13f7.jpg
Ready to BRRRRAAAAPPPPPP.
Now for engine and new seat!!!!

[MB9800]

What size are those rims and tires? Want to do something similar to mine.

[Yamawheeler]

28x11x12 mega mayhems on 12" SS 212 matte black rims.

[MB9800]

Thanks, nice looking wheeler by the way!

[Yamawheeler]

http://images.tapatalk-cdn.com/15/06/14/9eb0292ca092ef2013cbacb332dc87af.jpg new forks. still waiting on other engine but it's going to pay off.

[MB9800]

Could I ask how wow those rims are. I can only find 7 wide

[MB9800]

Correction: wide

[Yamawheeler]

Yep 7" wide. 12"x 7"x 115 Lots of rim saver on those babies lmao. It was so easy to switch over took me 10 mins

[MB9800]

Alright thanks

[CHRIZZ]

http://images.tapatalk-cdn.com/15/06/14/9eb0292ca092ef2013cbacb332dc87af.jpg new forks. still waiting on other engine but it's going to pay off.

This is inspirational! i cant imagine you needing the winch tho. or is it to pull out the 4x4s lol

[MB9800]

Not to bring an old thread back from the dead but, how did you get them tires to clear them fenders. Looks like they're propped up, could I get some pictures of that maybe? Just wondering cause I think I'm going to follow in your footsteps and do the same thing. Because man that looks sweet!!!

[Yamawheeler]

Winch is for the deep holes. Usually everyone gets stuck in those though. Thanks gents. It's a lot of fun. The only thing that doesn't clear are the mud flaps hanging out the back the tens to get caught by tire and fold in. Other wise nothing rubs. I am a little worried about the front fender bar bolts though if to much weight would be applied at the right angle it could gouge the trade in tire. Easy fix though. Rivet it instead of bolts

[El Camexican]

How is that winch plate attached to your tree?

[Yamawheeler]

The winch plate is welded to the bottom tree and bolted on the top tree using factory bolt holes.

[El Camexican]

Did you powder coat the fork sliders? Have you tried them since?

[Yamawheeler]

No kept them chrome. Have to powder coat the fork housing though. They are pretty scratched up. I do need a rebuild for them and don't know what type of forks they are.

[onformula1]

You can rebuild the forks without knowing what they are off of.

Sent from my SM-G386T1 using Tapatalk

[Yamawheeler]

Well that's very exciting to find out. How would I go about getting a rebuild kit for them then? They are not from my ytm 200. I think they are off of a streetbike.

[onformula1]

There is no rebuild kit per say.

Get the forks apart and cleaned then measure the top tubes and the OD on the fork seals and height, do the same measurements on the bushings, then PM me the info and I can cross them over for you and tell you where to buy them.

Sent from my SM-G386T1 using Tapatalk

[Yamawheeler]

Lamens terms dam it lmao jj. Lots of work lucky it's almost winter here

[bad to the bone]

back end pic?did u find out the type of front forks they are? How does the rear end and motor handle those 27 inch rear tires? Link to the rims and tires?

[bad to the bone]

video of it driving with those 27 inch tires?

[Yamawheeler]

I have not found out the forks but Iam taking them to a shop that will tell me and provide me with a rebuild kit. Rear end seems fine motor lags a bit if tires are not already spinning in mud but I fixed that. The rims - 12" ITP ss 212 the tires - 28-11-12 ITP mega mayhems.

[Yamawheeler]

http://images.tapatalk-cdn.com/15/12/27/69daa560d8d0669f0f964a98942d6b69.jpg

[Yamawheeler]

http://images.tapatalk-cdn.com/16/01/02/658b1d06ffa885e856310a45c1e942b4.jpg new front end for the ytm. Should be fun to pull the ice hut.

[Yamawheeler]

https://uploads.tapatalk-cdn.com/20160113/d5dd386bd98eed9b73a3f21cd9b623a7.jpg customized my front end a bit.

[Yamawheeler]

http://uploads.tapatalk-cdn.com/20160215/87a9c1272bbbabbb10e7d1d63de21284.jpghttp://uploads.tapatalk-cdn.com/20160215/dbc92a25d27d3c5a016b91b5ac4447d7.jpg she's almost done.

[conrad1431]

Those tires look good I just aquired an 85 Ytm 200e reverse shaft driven and it's giving me a hard time running any longer than a coup of seconds

Sent from my SAMSUNG-SM-G870A using Tapatalk

[Yamawheeler]

Rebuild you carb and clean. It

[MB9800]

Could I get a picture of under the seat where the exhaust is because I just bought a dg and I can't get it to fit.

[Yamawheeler]

Were you able to get it to fit? The DG comes with a extra bracket for the rear mount and it sits low close to engine block.

[MB9800]

Yep I got it thanks anyway though.