225 drs carb help

[jolson185]

Okay. Runs good. Idles good. However if u snap the the throttle very quickly it stalls then picks up fine. Also likes to take its time returning to idle. The pilot jet controls air right?

[jonx4x4]

The pilot jet supplies fuel at idle to about 1/3 throttle.

[Jmoozy27]

Air fuel mixture screw needs to be 1.5 - 2 turns out

[jolson185]

Air fuel mixture screw needs to be 1.5 - 2 turns outI've got that set. Just trying to figure out why it hesitates and takes a while to return to idle.

[jonx4x4]

Have you checked for vacuum leaks?

[jolson185]

Have you checked for vacuum leaks?

Wouldn't that cause a high idle all the time?

[Yamawheeler]

Main jet is prob worn out. They are cheap. But since it's open get all new jets and clean it out.

[Jmoozy27]

Air leaks cause a number of problem one being hard to tune a carb. Are you using an airbox and filter?

[jolson185]

Ok. Choke plunger was missing. Had a spare. Idles great. Runs great but still has the hesitation at a quick snap of the throttle. Seems to be getting better though