200S suspension

[emandem472]

I have a couple of Honda 200s's and was looking to put suspension kits on them. Any help would be greatly appreciated. Would a 200X swingarm/front end fit??
THANKS in Advance

[Ghostv2]

Anything will fit with some cutting and welding.

If your going to buy (or you already have) a 200x front end and a rear end you might as well just put the engine in a 200x. The "auto-x" is a pretty common thing as its all bolt on and go. So a search on here and you'll find a few hundred threads with useful info.

[Ghostv2]

But it can be done. (Not my bike)

http://tapatalk.imageshack.com/v2/15/03/21/0d41860d6c3498bc223eb5a3009aa2df.jpg
http://tapatalk.imageshack.com/v2/15/03/21/1ad0f32cb0974240091812657b57b3c8.jpg
http://tapatalk.imageshack.com/v2/15/03/21/394c66664380adccd504ea8ae20d85c3.jpg

[prometheus]

Why not sell the s and buy an x. Seems like it would be easier and possibly cheaper in the long run.

[RapidRick]

Ol Deuce has a trick little conversion piece to allow a 200x front end to go on that 200 chassis. I've used two for front end conversions and you can't beat it since you don't have to change the frame neck. Check it out.

In my state if you do anything to tamper with the steering neck, it's most likely instant impound.

[prometheus]

I love livin in Texas. No registration required on off road vehicles and I can modify it in any way I want.