ryanbsimmcon
03-24-2015, 05:37 PM
In doing my search I learned the carbs on the SX can be difficult, You guys were not kiddin'! I broke the plastic screw in piece on the plunger kit on the 85' the first go around. I ordered a new kit for $20. Then I took the one out of the 87' and noticed the valve on the 85' does not have the o-ring like the 87' does. Should I use the new valve that's in the kit for the 85'? Or re-use the old valve? The kit says 85-87 sx, from ebay. Was the o-ring just an improvement made for 87'?