PDA

View Full Version : Ytm 175 chain help



EnVknives
05-11-2015, 11:05 AM
How do I tighten my chain? Its real loose and pops off. I tired taking a link out but it would be too small then. Thanks.

EnVknives
05-11-2015, 02:34 PM
Anyone? Help?

dgm635csi
05-11-2015, 11:48 PM
There are 4 bolts that hold the rear axle carrier to the frame. These must be loosened first. Then there is an adjuster that sits underneath the rear axle carrier that must be tightened. This shifts the axle carrier rearward to tighten the chain. You only need about 1/4" of slack in the chain since there is no axle movement after the chain is adjusted. All of this is covered in the factory service manual available here: http://www.oscarmayer.net/atc/manuals/