PDA

View Full Version : Yamaha Mudding Ideas


MB9800
06-23-2015, 09:51 PM
Got myself a Yamaha ytm 200. Wondering what would be the best stuff to get to make this sucker a mudding machine. Tires and rims I know are going to be a must what would you recommend. Also is there any way to increase the ground clearance on these things. Thanks in advance.
gearhead9056
06-24-2015, 12:12 AM
A snorkel wouldn't be a bad idea, and make sure all seals are in good shape.
MB9800
06-24-2015, 07:41 AM
Yep definitely a snorkel and I'll check over the seals.
YamaBoss
06-24-2015, 08:30 AM
Did you get a chain or a shaft driven 200?
MB9800
06-24-2015, 09:17 AM
It is chain drive
YamaBoss
06-24-2015, 11:44 AM
You could get some different sprockets and give it some more low end power. Especially if it's only going to be used for mud and not used for anything speed related.
MB9800
06-24-2015, 11:54 AM
It's got a 11 and 42 combo and it seems pretty low
MB9800
06-24-2015, 11:55 AM
What about the tires and rims what about that.
muthey
06-24-2015, 02:31 PM
if you are looking for height clearance I would go with the 25-12-9 rims and tires that are on some of the ytm 200's I had a chain drive model with them.
MB9800
06-24-2015, 02:57 PM
Could you give me a link im having a hard time finding rims that size, I will also get some raptor hubs to get some more options if that helps.
muthey
06-24-2015, 09:28 PM
I have 2 of them if you are interested but when I am back at my PC I will find an eBay link for you
MB9800
06-24-2015, 10:37 PM
Alright thanks
muthey
06-25-2015, 01:23 AM
here's one they are a four bolt so if you have the three you will need a new front hub, but it is a direct fit using your three bolt hub spacers and axle. http://www.ebay.com/itm/83-84-85-YAMAHA-TRI-MOTO-200-YTM200-REAR-STEEL-WHEEL-RIM-3-LUG-STRAIGHT-/111684546006?hash=item1a00eaedd6&vxp=mtr Also you will need the four bolt rear hubs which I also happen to have.
muthey
06-25-2015, 01:34 AM
or you can keep the 22" wheel and have slightly better steering on it, as it will be a narrower tire.
MB9800
06-25-2015, 10:14 AM
I've got a four bolt hub in the front and the bolt hubs in the back.
MB9800
06-25-2015, 10:17 AM
Correction: Three
Yamawheeler
06-25-2015, 09:24 PM
http://images.tapatalk-cdn.com/15/06/25/17b17f90bbad7324c089ea962a75da5e.jpg
http://images.tapatalk-cdn.com/15/06/25/9a9741ebafe9dfc16225334a8cf55463.jpg

something like this you want?
Yamawheeler
06-25-2015, 09:33 PM
Winch goes under led light bar.
MB9800
06-25-2015, 09:39 PM
Exactly. How wide are those rims
Yamawheeler
06-26-2015, 06:21 PM
7" but tires are 11" wide