Frame repairs

[K1W1_Don]

Hi guys and gals
I am new to this forum. I have a ATC200ES which requires substantial frame repairs to the lower frame behind the engine.
The damage is caused by rust as this trike has I believe spent sometime on a salt water beach.

Based on your knowledge;
1) should I repair by welding in new lengths bent to shape or find a second hand frame with less damage.
2) what is the correct welding technique I should use and what sort of frame material is available.
3) Any other advice I need to get.......

Still stripping the trike, so photos by the weekend.

[jerkin]

Best way to fix a frame is with a tig welder and someone that knows how to use it. If you know such a person that is probably your best bet, if not a replacement frame may be cheaper in the long run.

[K1W1_Don]

Purchased this parts job as is for $100 so should have at least one frame from the two
219347
Motor is seized. I expect to have one running trike out of the two.....

[coolpool]

Problem solved! And probably cheaper than the weld job would've been.

[K1W1_Don]

Almost Coolpool success.
The second frame requires some welding but not as bad the first one.
Still stepping forward on the project and no going backwards!