PDA

View Full Version : XR200 exhaust ATC200



Ajacklee4
08-27-2015, 12:53 AM
Would an XR200 exhaust fit on an ATC200? Thinking of ways to get more power, maybe trying an aftermarket pipe would be cool.

Jd110
08-27-2015, 09:22 AM
Not trying sell anything. But, I just finished my 83' 200e with a DG exhaust and it is awesome. Bolts right up in minutes. Plus if your sitting back at all on the sit & hit the gas. WATCH OUT! This thing will launch you into a wheelie immediately. I'm 160lbs, so there's not a lot of weight back there. It is louder than stock but sooo much fun if your careful. Hope that's helpful

YTZ drew
08-27-2015, 10:00 AM
The XR pipe would require some mods. I layed an '00 XR200 headpipe over my '84 200X headpipe, and the bends are identical, but its a little shorter as its missing the last bend right before the muffler. The front section is a perfect match. That being said, a 200X has its exhaust "outside" the frame, and a plain 200 has it "inside" the frame.