PDA

View Full Version : Help identifying (possible) 200x engine



ibrettfavre
11-06-2015, 12:53 PM
Serial number on the motor says

TB01E
3012299

Any help would be greatly appreciated i need to get some rings and etc for it but dont wanna get the wrong ones would like to know if this engine belongs to a 200x and the year if possible

Mr. Clean
11-06-2015, 01:30 PM
http://www.3wheelerworld.com/showthread.php/141286-Honda-Engine-Serial-Numbers

ibrettfavre
11-06-2015, 01:33 PM
I didnt see it on there. I just need enough information about it to get the right rings, which would just be that its a 200x for sure right? I'm trying to upload a picture but phone wont cooperate

Mr. Clean
11-06-2015, 02:08 PM
tb01e-3000008~ = 1983 atc185s

ibrettfavre
11-06-2015, 02:20 PM
Ook my bad. You sure? I appreciate it

Mr. Clean
11-06-2015, 02:31 PM
I will do some more google searches. Does your engine have a kick start or pull start?

Here is my 200x engine.

TwiZ
11-07-2015, 07:51 AM
Personally i wouldnt order rings until i had it tore down so i could see condition of cylinder,piston,ect. May need bored,may have already been bored,and also the piston can give you info such as bore and piston size if it has,but thats the way i do things. If you know the history of engine and its not smoking turbo bad ya might get away with doing that

86125m
11-07-2015, 08:12 PM
oh yes always tere the engine down before ordering parts you never know what your going to find what presents the engine has in store for you. Take my 200m for example it started not staying in time because the cam chain was loose. I thought ok its about time for a rebuild I'll get rings, hone the cylinder and clean the valves up change the cam bows and chain. Well when I pulled the valve cover off the head. The cam was flat and the rockers looked bad as well. I went ok as long as the head is ok. Well it wasn't ok one of the valve guide was craked in half and when we tried to tap it out the head started crumbling around it. So I had to find a new head. It together now but it took a long time to find a head at the right price and in decent shape.