New guy with a question!

[JSalazar450r]

Hey guys! Just joined the forum because I looked around and couldn't find what I was looking for in regards to using an led light bar on an atc185s. I have one with no headlight at all and wanted to use an LED bar since they're really bright and relatively cheap. Will this be as easy as I think (connect a wire with power to the green on the light and ground to ground) or will it be a little more difficult? Maybe I need a certain wattage, fuses, etc. Never used an LED bar before or messed with lighting on anything without a battery so I need help! Thanks, Justin.

[tborden3035]

you will need a regulator/rectifier to change the voltage coming off the lighting coil from ac to dc

[DohcBikes]

In addition to the suggestion above, if your lighting coil is original, you may want to consider a more powerful replacement such as this one from rickystator: http://www.rickystator.com/product/stators/honda/honda-atc185-75-watt-lighting-coil-all-years

A small, efficient battery for further power stabilization and the ability to run the light without the engine running wouldn't be a bad idea either.

[JSalazar450r]

http://m.ebay.com/itm/AC-DC-Converter-6-12-24V-to-12V-Full-bridge-Rectifier-Filter-Power-Supply-Module-/141663274434?nav=SEARCH so something like this is what I need correct? I would probably have to make something up to keep water away from it