THE TF 2016 "Swap Meet" thread

[big specht]

Ok boys and girls it will be here before we know it so post up what you are looking for, cause there will be people coming from all over to ride and BS. So post what you want to find or sell it don't have to be atc related cause alot of us are into a lot of differant things.

[El Camexican]

I've got a few things I'd like to get rid of, but nothing I want to cart back home afterwards. If anyone is interested in the following please let me know via PM and I'll shoot you some better photos.
22-11-8 tires (2) - Kenda Scorpion - 10 hours use (max)
85 Tri-Z OEM rear fender, black, no cracks, black hides nothing, but they still look pretty good, they are dirty in the photo.
85 Tri-Z OEM front fender, black, no cracks, same as above
85 Tri-Z OEM head light, black with guard and headlights, but the wires were cut at the connectors and the temp light has been removed
85 Tri-Z swing-arm, stock length with good bearings and bushings. Metal was cleaned up before chrome PC and clear PC were applied, clean and ready to bolt on. Also have braided SS line to suit.
85-Tri-Z stock throttle cable (Not sure of condition, housing may be rough)
85-Tri-Z DG pipe, used, bare finish, some surface rust, but no dents
85-Tri-Z fork gators, black, no tears
YTM rear brake cable, did not fit 200K, might be for a 225? Contact me for length
YTM 200K triple clamps
YTM 200K forks, clean, grey PC lowers,some specs of chrome have lifted near the tops. May not be perfectly straight, but no more than .08" bent if at all. Fresh fluid, but they do make noise when they top out. I have the axle as well. Gators and caps not included
YTM carbs, OEM, have flange and clap style, they would need gaskets
I also have a fair bit of 03-04 Suzuki GSXR 1000 parts and 00-02 KTM 250/300 parts as well as a few stock 83 GS 1100E parts I'd be happy to part with.

I can only bring so much over the border, so no promises. Let me know and I'll try my best.

229205229206229207229208

[jimthetruckdriv]

What do you want for the two tires 22-11-8

[Queef Chief]

250sx forks with triples
250sx seat pan (foam may be usable)
250sx Stock silencer (baffle removed)
2 22x11x8 tires off SX (still plenty of life)
1985 250r air cleaner box w/lid
86-87 Tecate rear plastic(aftermarket)**Pending**
86-87 Tecate front fender(aftermarket)**Pending**
86-87 Tecate shrouds(aftermarket)**Pending**
Mystery pipe that came on Tecate (possibly factory pipe that has been modified)
Tecate stock silencer **sold**

May do some trading, or looking to purchase:

'86 Tecate carrier
'86 Tecate headlight lense
'86 Tecate headlight switch
'86 Tecate aftermarket flywheel
'86 Tecate case saver
'86 Tecate intake
'86 Tecate overflow reservoir
'86 Tecate rear wheel

[86T3]

I'm interested in your tecate parts queef, could you pm me pictures of the plastics and the pipe?

[big specht]

My brother is looking for a TRI-Z rear skid plate.

[ps2fixer]

Subbed to see what people are looking for.

I'll probably bring along my harness tools again and offer new harnesses, adapters, etc. I'd like to offer harness repair, but I do a lot of riding too so not sure how well that will work out. If you need a connector added back on your harness, stator, etc, shoot me a pm so I can gauge the interest and exchange the best way to communicate at the event. I'll have a smart phone with "limited" internet access due to poor signal. I'm thinking repairs will range around $5-10 based on the situation.


For used parts I have a ton of parts, too many to really list, but I'd love to get rid of some of the larger harder to ship parts.

Quick run down on what I have purely from memory

85 Tri Z Swing arm with blown out shock
~83 185s frame, has blue over spray but good shape (no title, not required in Michigan for its age)
83-85 200x frames, should have spare swing arm/axle parts too
185s bottom end, never had it running, but seems to shift though the gears just fine
~70-71 US90 bottom end, again never heard it run but it seems to shift fine though the gears by hand

I have a Suzuiki 125cc quad that needs a vacuum pump in fair shape too. It's an older machine, don't have the year on hand, Fenders were painted and droopy, maybe cracked a little don't remember 100% for sure. I do remember it being a smoke machine so the top end needs re-worked (rings I'm assuming). Not planning to bring it unless there is interest.


Camp location was down at the pond last year, I'll probably try to get the same general area again. Basically down the hill from the main building and to the left at the fork. Gray/Silver T100 Pickup with a black topper and likely a dark green Tundra near by. Maybe a 4runner or two depending how things work out.

[El Camexican]

What do you want for the two tires 22-11-8

I'd like $50 for the pair. If that seems high let me know, their just taking up space here, but they are in close to new condition, you can see them in the picture of the yellow trike.

[MRSOUND]

I'd like $50 for the pair. If that seems high let me know, their just taking up space here, but they are in close to new condition, you can see them in the picture of the yellow trike.

If jimthetruckdriv passes on the tires I'll take them. Perfect for the KLT's

[kiser]

I have a 85 Tri-Z headlight that is rider quality. It fits and functions fine but has a couple flaws. It comes with a top triple that is in great shape. Make offer or trade for ??? It's just taking up space so let me know what you have.

[captainweezy]

I am coming early and leaving early again this year but am happy to bring along anything. Thousands of parts here. What do you need?
Many motors including atc 70, 90,110, 185, 200, 200e, 200es, sx big red and 3-4 350x bottoms.
Rear fenders ,forks
86 running 200x, oem plastic! $1000
1 auto x project 90% complete $350
1 84 200x roller $150
87 125m frame very nice for $50
1 250r 83/84 bottom dirt cheap$25-sold
almost a complete Kawasaki 110 in parts-no tank
Like new 250sx front knobbie tire mounted on nice clean rim $65,
Full part out of 86 350x, shall i go on and on?? I also have new design T-shirts and hoodies!
350x rear mud flap garnish
250sx new headlight guard-$65 white in color and still in the package
A full sx part out
Very nice set of 3 knobbie tires mounted on sx rims
83-84 250r forks
81-82 R forks with triples
350x front rims both 85 and 86! Both have tires mounted.


Message me or call me. 2173704573 i can send pics if needed. Thanks to mr jason spect for starting this thread.

[Thunder God]

In a dream world someone would have a rear set of 86 350x fenders and nos 87 200x rear fenders?

[captainweezy]

In a dream world someone would have a rear set of 86 350x fenders and nos 87 200x rear fenders?

Better luck playing power ball.

[Daddio]

I am coming early and leaving early again this year but am happy to bring along anything. Thousands of parts here. What do you need? Many motors including atc 70, 90,110, 185, 200, 200e, 200es, sx big red and 3-4 350x bottoms. Rear fenders forks, an 87 125m frame, 1 250r 83/84 bottom dirt cheap$25! Comes with shifter for free (welded on lmao), new never used first gen 200x maier full fender set with nice seat. Includes tank scoops and front/rear fender $250. New sx front knobbie tire mounted on nice clean rim $65, full part out of 86 350x, shall i go on and on?? I also have new design T-shirts and hoodies!

Message me or call me. 2173704573 i can send pics if needed. Thanks to mr jason spect for starting this thread.
Dammit man, when are you leaving this year?

[captainweezy]

Dammit man, when are you leaving this year?

Sunday to tuesday/possibly wednesday

[MotherTucker85]

I am looking for a mud trike. Just needs to run and have a headlight. Not worried too much about how it looks.

Have parts on trade and/or cash.let me know what you have. Below are the parts

350x frame- typical cracks 75.00 obo
350x axle- 75.00 obo
350x hubs- 40.00 obo
70 motor- comes with exhaust, carb, pull start 150.00
250x carb-40.00

[u.p ted]

I have a 1977 honda 90 . All original. In good shape needs tires from sitting for so many years in a guy's garage. It would be a great project 3 wheeler for somebody to restore . Looking to get $400

[captainweezy]

I have a 1977 honda 90 . All original. In good shape needs tires from sitting for so many years in a guy's garage. It would be a great project 3 wheeler for somebody to restore . Looking to get $400
Daddio where ya be on this one?

[MotherTucker85]

I am looking for a mud trike. Just needs to run and have a headlight. Not worried too much about how it looks.

Have parts on trade and/or cash.let me know what you have. Below are the parts

350x frame- typical cracks 75.00 obo
350x axle- 75.00 obo
350x hubs- 40.00 obo
70 motor- comes with exhaust, carb, pull start 150.00
250x carb-40.00

Found a 200s

Parts are still for sale and can be delivered to Trikefest

[loshe191]

.I have a friend that has a 87 tecate 4 engine with good extra cases and electronics he has the whole quad but it's in pieces he also has a 90-91kx500bike minus rear wheel assembly pm me for details I can get you in touch with owner we can bring to trikefest

[M.Pargiello]

I'm looking for a liquid R basket case or roller. A project, but nothing absolutely trashed, will have cash at trikefest

[90nut]

I am looking for a good 85 tecate frame. I also have a full set of trimoto 125 plastic that I'd like to get out of my garage. No one ever commits to buying them because shipping is so pricey.

[mikey kinikey 4]

What u looking to trade for light for triz or cash price

[knipfeldustin]

23226723226823226923227023227123227223227323227423 2275232276

1979 Honda Atc70 with factory paperwork.
Be a great restoration project, As far as i can tell all oem except for the tires.
Starts and runs/rides and shifts good.
Carb float needle is stuck and carb is overflowing currently may or may not get around to messing with it.
Ill be at trikefest thursday-sunday.
$1000 would buy it, ill take offers until i depart for tf.

[mikey kinikey 4]

I have a 85-86 350x rear skid plate
Have a 84-85 tecate frame trips front pipe and rear stk rear hubs and 2 gastanks for tecate
2 yamaha 225 bottom ends of engine they are shaft drive
If interseted pm me i can deliver to tf

[Eric250R]

My buddy will have a 2014 CRF150 for trade...looking for a 200X or an air cooled 250R...nothing wrong with the bike at all.

[xrider]

Anyone that is heading to Trikefest have a 1982 250r Frame (whichever one has the odd bulge of the left of the backbone), fuel tank, and full set of engine mounts and spacers?

[big specht]

It's a powroll cam for a z50 brand new never ran. I'm open to offers 232575232576

[atctim]

I'm bringing a Paul Turner Type 6 pipe for an R to sell for a friend. Hit me up with interests.

[danbur55]

Anyone that is heading to Trikefest have a 1982 250r Frame (whichever one has the odd bulge of the left of the backbone), fuel tank, and full set of engine mounts and spacers?

I have an 81 frame and those parts for same frame will have to look to see about bulge when I get home. I am not going to trike fest but if I can make a connection with someone coming thru Texas will gladly pass them along and if they have room will toss in some other stuff

[daddy420big]

i have a bunch of 110 and 200s,185s 200es parts . text me at 570-204-3175.

[captainweezy]

Anyone that is heading to Trikefest have a 1982 250r Frame (whichever one has the odd bulge of the left of the backbone), fuel tank, and full set of engine mounts and spacers?

I have a very nice tank.

[atctim]

Here is the Paul Turner Type 6 I'll bring if there is anyone interested. Pipe and silencer $350

[nicker71]

Anyone that is heading to Trikefest have a 1982 250r Frame (whichever one has the odd bulge of the left of the backbone), fuel tank, and full set of engine mounts and spacers?

I have a good 81 250r frame and I think a damaged 82 frame( I'll have to check to confirm this. The back 3 inches or so on frame was cut off) I'm be at TF the 23-26th. Pm if your interested.

[xrider]

I have a good 81 250r frame and I think a damaged 82 frame( I'll have to check to confirm this. The back 3 inches or so on frame was cut off) I'm be at TF the 23-26th. Pm if your interested.

Appreciate the offer. Really need an 82 frame with the snorkel on the side of the backbone for my resto.

[keister]

For sale. FMF pipe for 85-86 250R. Complete system. Great shape. It was on the Vega$ R (my TT racer last year). PM me if interested.

[conbon]

I have:

-Forks (straight but leaky)/trees/shot front brake from my '84 R
-'83-84 R seat with oem cover (one tear on corner, one stain)
-one nos ohtsu pro wedge 2
-a set of like 18x9-8 knobbies on aluminum 4x110 rims
-a set of like 18x9-8 turf tires on itp 4x110 beadlocks
-one really long swingarm from I believe a banshee
-set of 83-85 110 rear plastics with like 10 cracks but no missing pieces, free homemade seat
-one 350x

-Connor

[IKE-Z]

I have a 85 FL350 Oddessy. I call it a project but it's not far from running. Has spark and compression.
Comes with new starter which it needs and other spare parts.
I will be at trikefest but only the last night due to work schedule. I'm about 45 min-hr drive from haspin.
Asking $1250 or may consider partial trade on a running atc 70 or tri zinger.232738

[captainweezy]

I updated my list on the first page as I have been clearing out my shed. A couple complete machines and a couple project machines I will be bringing.

I am looking for 1 fork cap,for an 86 200x.

[Thunder God]

Be looking for a fuel tank and chain case cover for first gen 200X. Tell what you have and what you want for it, thanks.

[MRSOUND]

Will have 83 185s along to sell as a beater. It will need a tank and probably a recoil spring sooner than later. Smokes, headlight housing will be taped plastics cracked but intact. Not pretty at all. Looking for first $200.https://vimeo.com/171029868


SOLD

Sent from my iPhone using Tapatalk

[captainweezy]

Y
Will have 83 185s along to sell as a beater. It will need a tank and probably a recoil spring sooner than later. Smokes, headlight housing will be taped plastics cracked but intact. Not pretty at all. Looking for first $200.https://vimeo.com/171029868


Sent from my iPhone using Tapatalk

You need to sweeten the deal with some jerky!

[MRSOUND]

Y

You need to sweeten the deal with some jerky!

Oh I will have some jerky:naughty:

[yourlossmygain]

I am in need of a set of 9" wheels that fit banshee hubs.

[MRSOUND]

May let go of my running 85' 250sx. Only reason being a fellow coworker is getting rid of his in very nice condition. This is not a show queen but mechanically has not left me down. It did however roll me over on a snowy hill that I should not have attempted. Therefore frame is bent and pulls when riding. Headlight guard did its job protecting light but is tweaked along with rear rack. Guard and rack I'm sure can be straightened. I have another frame (straight) that will go along with it. Tank has epoxy, shaft has some kind wrap in place of the boot (used boot with clamps will be included). Start button broke during roll but kick starts easily. Tried to highlight all of this video.
I will entertain cash offers there. Only catch is this will be trail trike till Saturday evening at which time if a deal is made new owner can take possession. PM me with any questions, I'll be happy to answer them. https://vimeo.com/171229188

232792
Sent from my iPhone using Tapatalk

[jeswinehart]

Looking over my Polaris trike I noticed I'm missing 1 exhaust spring. Looks like a spring that can stretch to 3 inchs will work.
So if anyone has a extra they can bring along please stop by my camp or let me know who has a extra and I will pick up at TF2016.

Thanks guys, john

[Ghostv2]

I got some 110 parts, some 225dx parts also.
Pm me for more details.

Here's a link to some 110 parts I posted up a while ago. More than pictured. Let me know by Monday or Tuesday morning and I'll load them up.
https://williamsport.craigslist.org/snw/5602430740.html

Also have a box of 200m misc parts. Lots of engine parts, carbs, lights, etc. I'll take a deal on the lot. Or if you need something specific since it doesn't take up a lot of room it's free.
http://uploads.tapatalk-cdn.com/20160620/6d0a7ba2413718bc83102597d9e30603.jpg

[Hunting Chip]

I may bring the '84 110 and put a for-sale sign on it. I'm kinda torn. I bought it because that was the first trike I ever had as a kid. I put some brand new plastic on it, but haven't gotten around to the TLC like a new muffler, carb tuning(seems like it bogs down or floods itself sometimes (after doing a few wheelies, haha) but then I'll play with the idle screw and it will rev right up again for while). Starts easy and sounds pretty good. Has a kill switch button, working light, only the foot brake. I have all the original (cracked) plastics with the 110 mud flap extensions. I'll be there fri, sat, and Sunday. I may squeeze it in with us. 232839232841