PDA

View Full Version : Need help with 200x flywheel pulling!



3wheelers
04-06-2016, 09:14 PM
I'm about to pull the flywheel on my 200x, I don't have a flywheel puller though, I'm about to drive into town to buy one. Do I need some sort of special one or will a regular one work??

flynfish
04-06-2016, 09:16 PM
I used the front axle worked like a charm.

Sent from my XT1565 using Tapatalk

Mackus84
04-06-2016, 09:19 PM
I used the front axle worked like a charm.

Sent from my XT1565 using Tapatalk

Really? Wish i knew that when i needed mine off!

flynfish
04-06-2016, 09:19 PM
Yep just screws in and pushes off flywheel

Sent from my XT1565 using Tapatalk

yaegerb
04-06-2016, 09:21 PM
Buy this.....

http://m.ebay.com/itm/83-85-ATC-200X-Flywheel-Puller-ATC200X-/291646617054?nav=SEARCH

wonderboy
04-06-2016, 09:38 PM
Just to make sure you follow what everyone is saying: You don't want any sort of jaw puller. Don't grab onto the outside ring of the flywheel and pull. The official puller is just a bolt that threads into the threads on the inside surface of the hole on the flywheel and pushes on the end of the crankshaft, forcing the flywheel off. All you need is a bolt with the same thread (looks like M14 x 1.5). Like what has already been stated, use your front axle. The thread on that is the correct size. Be sure to put a little grease on the threads of the flywheel to prevent them from galling. Use an air impact wrench and it will zip right off.

3wheelers
04-06-2016, 10:23 PM
Ok thank you everyone. I'm gonna try using the front axel, I'll let you guys know what happens.

3wheelers
04-08-2016, 03:48 PM
Used front axel and it came right out perfectly! Thanks for the help guys!

flynfish
04-08-2016, 10:40 PM
Used front axel and it came right out perfectly! Thanks for the help guys!
Awesome good to hear.

the only time I will be easy is when I'm killed by death