200x sprocket swaps

[flynfish]

Hey all getting time to get some new sprockets, but I have a couple questions before I buy. As of now I have stock gearing on my X. I am running 20in tires and will be going to an 18in. I am looking for more topend than what I have now. Will be going back and forth on tires, so what would you fellow trikers suggest.

the only time I will be easy is when I'm killed by death

[YTZ drew]

Change out the front sprocket for one with 1 or 2 teeth more. That should probably get you where you want to be, with the added benefit of less wear (smaller sprockets wear faster) and it's cheaper than changing the rear.

[RUNMEDOWN]

Gen rule is every 1" tire size change = 4 teeth rear sprocket differance. Every 1 tooth on the front = 3 rear teeth.
More teeth on the rear = more grunt, less top end
More teeth on front = more top less grunt.
I am running a 30 rear with 11 front (200e Auto-X) with 18 inch tire = very near stock overall. That should give you an idea.