atc110addict's auto X

[atc110addict]

Hey guys! I have been putting in countless hours on this build, she started life off as a stock 200x. I then swapped to a 350x front end, and a 350x shock, swinger, sprockets, and axle. The motor is a 200x top end with a 185s lower end. But I blew a fork seal last night while I was out ripping in the field, so I am gonna go back to a stock 200x front end, or run an 85-86 250r front end setup for even better suspension!!
Mods list: 66mm Helm & Son 10.5-1 piston(thanks to Shortline), xr200 intake, xr200 carb, uni filter, and jetted for these mods!
230904230905230906

[DohcBikes]

The 83-84 R suspension is the way to go on a 200x.

[flynfish]

Hey guys! I have been putting in countless hours on this build, she started life off as a stock 200x. I then swapped to a 350x front end, and a 350x shock, swinger, sprockets, and axle. The motor is a 200x top end with a 185s lower end. But I blew a fork seal last night while I was out ripping in the field, so I am gonna go back to a stock 200x front end, or run an 85-86 250r front end setup for even better suspension!!
Mods list: 66mm Helm & Son 10.5-1 piston(thanks to Shortine), xr200 intake, xr200 carb, uni filter, and jetted for these mods!
230904230905230906
How much fab work went in to putting a 350x swinger on the 200 frame

the only time I will be easy is when I'm killed by death

[Mackus84]

What jets are you using with this setup. Mines pretty similar setup except with a wiseco 10.25:1. Ive asked around alot but more opinions are always welcome