Carb for my atc 110

[Joshua81]

I was looking for a new carb for my 110. I found one on ebay and was wondering if it was a good fit.231883 this is the carb.

[1979atc]

I was looking for a new carb for my 110. I found one on ebay and was wondering if it was a good fit.231883 this is the carb.

If you are running a stock 110 you can't run this carb, it would run poorly trying to keep up with the amount of fuel you are giving to the motor. If you were to use this carb on a hi performance 90/110 you would need a aftermarket intake manifold so the bottom of the carb could clear the cylinder.

[Joshua81]

Thanks, i just wanted to make sure before i bought it.

Sent from my SM-G920P using Tapatalk

[Joshua81]

I do want more power out of my 110 but i dont know where to start, so i think i may just rebuild it stock.

Sent from my SM-G920P using Tapatalk

[1979atc]

No problem, just get a stock carb and you should be golden.

[derrick81787]

I bought this carb (http://www.amazon.com/Carburetor-1979-85-1984-85-ATC125M-1980-86/dp/B00AWBNQ0I?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00) for my ATC 110, and it works great. It is a direct bolt-in replacement in every way except that the tube on the top that the throttle cable passes through wasn't the right diameter. The cap to the old carb threads on to this one perfectly, though, so if you have that still then you can just continue to use it and it will be a perfect match.

I made a bunch of posts on here about carb issues, but it turns out that it was actually my ignition timing all along. Once I fixed my ignition timing, this carb worked perfectly.