Bayou 220 carb dimensions

[MRSOUND]

Does anyone have KLF bayou 220 that they could get the outside dimensions of the intake and airbox ports of the carb? I'm searching for an alternative carb that still has replacement parts and rebuild kits available for my KLT160 and KLT185. Wanted to see if this carb could be a direct mount or not. The KLT is VM22ss with intake O.D. of 1.308 and airbox side of of 1.615.
Thanks in advance!

[danbur55]

will try to pull carb next day or so and mic one for you believe this one is 95 model

[MRSOUND]

Thanks man! That would be greatly appreciated!


Sent from my iPhone using Tapatalk

[danbur55]

this is a mikuni intake OD 1.412(36mm), airbox side OD 1.605(41mm), OAL 3.285, height (bottom of bowl to top of slide chamber without cap) 5" have not opened it up but can if you need any jet sizes, not sure of carb model there is some numbers stamped up by intake side but cant be for sure what they are hope this helps danny

[MRSOUND]

Thank you for taking the time to do this and adding the extra dimensions. If I go this route looks like I might need to see if the intake/boot will mount up as well from the 220. Again thank you!!
Mike