PDA

View Full Version : 200es Big Red Rear Rack Help



djtimpe
07-20-2016, 09:41 AM
After several trips to Eastern Washington under my belt, all of which included miles and miles on a friend's ATC 110 and ATC 185s, I knew I had to start the search for one of these magnificent machines. Well, I found a 1984 200ES Big Red one state away and made the trek. The machine is in great shape but has a quad one-piece rear fender bastardized onto the rear. I have a correct set of rear fenders coming and have the original rear rack and tool box but need some help...

I believe I have all the original hardware but I am unsure of how the rear rack, fenders, grab bar, and toolbox integrate. It would be super if someone could post pictures of an assembled 200 Big Red rear end to include shots of the underside and topside, showing the whole shooting match.

I'll post some pics of the machine as the progress continues. Thank you

arlaunch
07-20-2016, 10:33 PM
I would be happy to do that but it will be 2-3 weeks until i get back to the Big Red.

Have you purchased a hard copy, or downloaded the free shop manual online yet?

djtimpe
07-20-2016, 10:38 PM
Yes, downloaded a shop manual but could still benefit from some photos. Thanks much

arlaunch
07-21-2016, 01:07 AM
I bet somebody shows up with a bunch of photos before i do.

I wish i could get to it sooner.

deejaycee_2000
07-21-2016, 03:01 AM
Hope this helps ... just general pics of my 200e but you can get a slight idea if you zoom in ....233505233504233503233502233506233507

FBF
07-21-2016, 05:55 AM
Hope this helps ... just general pics of my 200e but you can get a slight idea if you zoom in ....233505233504233503233502233506233507

good god man! that is mint! im very jealous