PDA

View Full Version : 1984 Honda 125m Atc Wiring issue



ChevyNexus
10-12-2016, 10:25 PM
Hey all meant to post this awhile ago but life happened haha.

I have a 1984 Honda 125m ATC that a dog got ahold of. Long story short, I bought a new wiring harness fished it through the body and got it mostly hooked up. Problem is now though, I have a few wires left that I can find a place for. One I assume is a neutral safety coming off the engine, the other is the wires coming off the pulse generator. Pics included below.

235684235685235686235687235688

atctim
10-13-2016, 11:07 AM
the blue and green coming out of the pulse generator should plug directly into the main wiring harness. Actually, all of the wires you show plug in directly to the main wiring harness.

drzdale47
10-13-2016, 07:41 PM
I have a 86 trx125 and it had so many electrical problems what a pain it was

Sent from my VS985 4G using Tapatalk

Black_Widow
10-13-2016, 10:54 PM
If it is anything like my '83 110, then the blue and dark green wires coming from the pulse generator should plug into the main harness that is below the gas tank on the right side of the trike under a rubber boot next to CDI unit. If you're lucky, the other side of the connector is still somewhere and you can just splice the wires back together. The green wire should plug into the harness as well with a single inline type connector if I'm not mistaken. I'd try to get a look at those main harness connections near the CDI and see what it looks like there.

Black_Widow
10-13-2016, 10:59 PM
235732
Here's a pic of the wiring diagram.