View Full Version : 350x rear fender hardware help
bmddtucker
10-16-2016, 07:03 AM
One thing I forgot and I am missing, I ordered the screws and oval mud flap metal inserts for both map flaps I have but the round inserts that are inside the recesses or mold in the actual rear fender itself I need. Can't seem to find a part number, or any information on here, checked e bay, ect, I could use 4 if someone has a stash and wants to sell me 4 or... A way around them or if someone has used something else that works. Any hell would be greatly appreciated
Thank you
Onetrackmind
10-16-2016, 08:01 AM
I wasn't ever able to find those threaded inserts either, so I a couple that were close in size at the hardware store. They wound up being SAE, but oh well.
You may try NAPA or Fastenal and have better luck w metric, but these really work just fine.
Sent from my iPhone using Tapatalk
bmddtucker
10-16-2016, 09:40 AM
Know what size you picked up? Sae is fine
bmddtucker
10-16-2016, 11:01 AM
I'll figure it out unless someone has sae size or some in a bucket of bolts laying around. Thanks
Onetrackmind
10-16-2016, 11:44 AM
Know what size you picked up? Sae is fine
Unfortunately, no I don't and that machine is out of town so I can't look and see. I just took one of my OEM screws and got the closest size match, then epoxied the knurled inserts into the fender holes.
Sent from my iPhone using Tapatalk
bmddtucker
10-16-2016, 02:14 PM
Thank you I found a few things that work, something like yhat and rubber expansion plugs, actually metric which I used first worked great
arlaunch
10-18-2016, 01:56 AM
http://www.powersportsdiscount.com/oemparts/a/hon/506baa43f870023420a212a1/seat-rear-fender
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.