PDA

View Full Version : 84 250r stator! Interchangeable to other years?



ivan-083
11-22-2016, 07:32 AM
Hey guys
Chasing a 84 stator, are any other models interchangeable?
Please help
Thanks Ivan

atc300r
11-22-2016, 09:15 AM
81-84 atc 250rs take the same stator.Motor wise they are the same except the shift shaft on 83-84 is shorter than 81-82.

ivan-083
11-22-2016, 11:17 AM
Atc300r, are you definitely sure about this? They do look the same though. Iam in Australia and want to make sure before I purchase one from the us. The 81 has a different part number but still will fit? The pic below is a brand new one from Germany, don't want to buy and it can't fit. Thanks

atc300r
11-22-2016, 11:20 AM
100% . I have 81-84 motors and they are all the same with the exception of the shift shaft.
Atc300r, are you definitely sure about this? They do look the same though. Iam in Australia and want to make sure before I purchase one from the us. Thanks

ivan-083
11-22-2016, 11:25 AM
Excellent, do you know where I could get a new one in the us? The one in Germany is pretty expensive or is that a reasonable price?

atc300r
11-22-2016, 11:33 AM
Im not sure what the cost is to you but that being new Id get it . They are hard to find new here in the US. Does it come with the flywheel.

ivan-083
11-22-2016, 11:36 AM
Yes it comes with the flywheel and new, Iam hoping it fits on the 84!

nicker71
11-22-2016, 01:12 PM
81-84 stators are the same atc300r is right it will fit.

atc300r
11-22-2016, 01:26 PM
You should check out air-foolers.com. it a site like this dedicated to the 81-84 250r mostly. Lots of good info. Several guys from here are members there . Also some guys on there from Australia.

ivan-083
11-23-2016, 12:25 AM
Thank you very much Nicker71 and atc300r! Your help is greatly appreciated, thanks so much. I will also check out air foolers too.
Ivan