View Full Version : Carb help please
Whiskeythrottle
01-03-2017, 10:29 PM
Trying to rebuild my 86 250es carb and the last jet is almost stripped out. What should I do? http://uploads.tapatalk-cdn.com/20170104/6ae07d0ae14d6364ed953042192e9fa2.jpg
Sent from my HTC One M9 using Tapatalk
yaegerb
01-03-2017, 10:32 PM
Heat it up with a butane torch and see if it will come out.
And for the love of all things holy, set that carb in some Berrymans chemdip for a couple days. It's pretty bad.
8DO83
01-03-2017, 10:46 PM
yeah i agree with yaegreb soak that carb down for a few days then should be good.
Whiskeythrottle
01-03-2017, 10:48 PM
Heat it up with a butane torch and see if it will come out.
And for the love of all things holy, set that carb in some Berrymans chemdip for a couple days. It's pretty bad.
Bought it off eBay off a "running" br but I couldn't get it going. It's obvious why it won't run lol the guys @ the parts store recommend this stuff. Even has a basket inside to hold your parts. Hopefully it works good. http://uploads.tapatalk-cdn.com/20170104/11304f7b4bc5e0388fff2504041c893e.jpg
Sent from my HTC One M9 using Tapatalk
yaegerb
01-03-2017, 10:50 PM
Should work just fine. Remember to remove all thing plastic or rubber from the carb body and bowl.
Whiskeythrottle
01-03-2017, 10:52 PM
This is what it looked like before a can of carb cleaner. What a joke http://uploads.tapatalk-cdn.com/20170104/6a3beff2f369dd21a3a2fcedb6ed0824.jpghttp://uploads.tapatalk-cdn.com/20170104/8b6982c1e0f434963cb8dbdffa02b59d.jpg
Sent from my HTC One M9 using Tapatalk
itsjacob
01-04-2017, 09:22 AM
Lps1 also works wonders! Spray some in the Jets and let them sit a bit, hopefully it will knock some of the Jets loose
Sent from my SM-G935T using Tapatalk
Whiskeythrottle
01-05-2017, 10:51 AM
Heat didn't work so a hammered a t10 torx bit into the jet and backed it out with my drill. Worked like a charm.
Sent from my HTC One M9 using Tapatalk
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.