PDA

View Full Version : 200es wont start



bob 200es
01-10-2017, 06:58 PM
Ive had my 200es for 2 years with no problems .Ive put on fenders new carb painted the racks, every now and then my battery will go dead(new battery) when I use my sprayer on the back. And sometimes after a long time ill have to charge it. any help would be great

bob 200es
01-10-2017, 07:44 PM
should have said wont charge

350for350
01-10-2017, 09:51 PM
I'm no expert on this, but I believe they have a charging circuit and an ignition circuit in the wiring. I'd say that your charging circuit is barely charging. I recommend getting or downloading a manual and testing the components. If you just want advice on a part to throw on it, I'd try the regulator. Caution...just buying parts and installing them can cost a lot of money. That's why I recommend the manual and test method.

DiamonDon
01-13-2017, 02:22 AM
I agree,
This sounds like a job for the trusty "free with purchase" multimeter from Harbor Freight!

You'll find your repair manual here, for free. Bless the interwebs :)
http://www.oscarmayer.net/atc/manuals/

Share your results here please, some day another fine collector of the venerable 200es will come across your same issue (searching the site) and wonder what became of this adventure!