Atc 70 no spark

[Bottomland4x4]

I have been having problems with my pull start on my 70, the clip that holds it together came off and it came apart. I pulled it off and one of the three starter pegs was behind the flywheel. I got a flywheel puller and the peg was stuc to the magnet. Well it must have knocked the points out of time because now I have no fire. I took the flywheel back off and everything appears to be intact?
I searched the forum for no spark, but no one has had this type of problem? Any suggestions? I did replace the plug,but you get nothing no shock or spark at all.

[Gooose]

Did you check your gap for the points?

[Bottomland4x4]

Not yet, it worked and ran fine before the pull starter assembly came apart. I just wonder if that could be what messed up the points clearance?

[efhondakid]

Pull the plug out roll the motor over by hand and check that the points are opening. Then check they are set to proper clearance 0.014"-0.018" if my memory serves me correctly.