PDA

View Full Version : '84 atc70 no spark



justmefilm
03-05-2017, 11:34 PM
'84 ATC70 with most of the wires cut.

Trike had an intermitent issue...would start on first or second pull. When it was shut off, it wouldn't restart, even if it was off for only a minute. Replaced stator coils, points, condenser and ignition coil...now I've got nothing, no spark at all. The only thing not hooked up is the neutral switch. I can't figure out what it hooks up to...schematics are no help. Ground seems fine.

Thanks

shortline10
03-06-2017, 12:16 PM
Don't worry about the neutral switch , it's not needed . Did you buy an aftermarket coil ? If yes their crap .

justmefilm
03-06-2017, 06:09 PM
coil and stator from Spangler.

justmefilm
03-08-2017, 04:27 PM
Turns out...bad solder on bondenser. I'm a silly bunt.