350x tool box swap?

[Shawn Powell]

I read somewhere (and of course I can't find it now) there's a modern tool box of a new dirt bike that bolts right up to the 350x mount. Mines in bad shape. Anyone know about this or any other options? Mines a resto mod so I'm not concerned about all original.


Sent from my iPhone using Tapatalk

[Shawn Powell]

Gonna bump this anyone got any info? Mine literally fell off this last weekend and is now somewhere lost in the San Bernardino forest. With some nice wrenches in it. [emoji26]


Sent from my iPhone using Tapatalk

[KIM 501]

i used a polaris scrambler 400 tool box-holes just about line up,but u can get bolts to start without
making holes bigger

[BOB MARLIN]

The last tool box I bought came right from honda- with the tools about 3 years ago. It was for my 250r but I think they may be the same one for the 350x. I remember the price not being to bad either.
Where in the San Bernardino forest did you lose it ?. I live in Devore. Next time I'm out I'll keep an eye open for it.

[Shawn Powell]

The last tool box I bought came right from honda- with the tools about 3 years ago. It was for my 250r but I think they may be the same one for the 350x. I remember the price not being to bad either.
Where in the San Bernardino forest did you lose it ?. I live in Devore. Next time I'm out I'll keep an eye open for it.

I was in miller canyon. I went from miller canyon to deep creek. Through pinnacles. Mostly bummed cause I don't wanna have to go the DMV to replace my registration. I would go find it today but I have to many things to do around the house. Thanks!!


Sent from my iPhone using Tapatalk

[Shawn Powell]

i used a polaris scrambler 400 tool box-holes just about line up,but u can get bolts to start without
making holes bigger

I have a PRM six pack rack / desert grab bar. I think I'm going to modify it to fit a 400ex tool box as I have one to use as a mock up. Should be as easy as drilling and tapping a hole. Easy to get not to expensive 34$.


Sent from my iPhone using Tapatalk

[Shawn Powell]

The last known sighting of my tool box. 4-6-2017 deep creek California. It's between there and miller canyon https://uploads.tapatalk-cdn.com/20170409/d3239c4d930701127c2b3a7a10cc31c9.jpg


Sent from my iPhone using Tapatalk

[Shawn Powell]

Well maybe this helps someone else. I took a 400ex toolbox (2002 but I believe there all the same ) and drilled a hole in my PRM grab bar and through bolted it. I did tap it for a bolt but it stripped the first tightening. Through bolt it is. Not gonna pay 150 plus for an OEM or triple for a nos unit. 34$ for a new 400ex unit and a 5 cent bolt. Deal

https://uploads.tapatalk-cdn.com/20170410/879f66ca1a2c0234eac9b21d4a726a20.jpg

Sent from my iPhone using Tapatalk

[BOB MARLIN]

One good thing about the 400ex tool box is that a coors light can fits perfect inside.

[Ranvier]

Well maybe this helps someone else. I took a 400ex toolbox (2002 but I believe there all the same ) and drilled a hole in my PRM grab bar and through bolted it. I did tap it for a bolt but it stripped the first tightening. Through bolt it is. Not gonna pay 150 plus for an OEM or triple for a nos unit. 34$ for a new 400ex unit and a 5 cent bolt. Deal

https://uploads.tapatalk-cdn.com/20170410/879f66ca1a2c0234eac9b21d4a726a20.jpg

Sent from my iPhone using Tapatalk

Looks clean and functional.