200x Kickstarter lever

[8DO83]

Hey guys. I am wondering how I would tighten up my 83 Honda 200x kicker I replaced the spring inside but it just keeps flapping around when I ride. How would I fix it?
Thanks,
Milan


Sent from my iPhone using Tapatalk

[deejaycee_2000]

I have the same problem with my 83' 250r kickstart lever, tried every shop, every scrapyard, no other kick start lever seems to fit. I'm at the point where I might just get one fabricated, but that will be as much as the trike is worth.

[8DO83]

I have the same problem with my 83' 250r kickstart lever, tried every shop, every scrapyard, no other kick start lever seems to fit. I'm at the point where I might just get one fabricated, but that will be as much as the trike is worth.

Yeah I hope there is a way to fix it cause it's pretty annoying.


Sent from my iPhone using Tapatalk

[yaegerb]

Hey guys. I am wondering how I would tighten up my 83 Honda 200x kicker I replaced the spring inside but it just keeps flapping around when I ride. How would I fix it?
Thanks,
Milan


Sent from my iPhone using Tapatalk


You need a new spring, ball and o ring and lots of grease.

[8DO83]

Ok thanks!


Sent from my iPhone using Tapatalk

[AZ1320]

it should be just the spring. I have the opposite problem mine is tight as hell.