Clutch 200x

[ladyzm18]

Replaced 1984 200x clutch, finally getting better about letting me engage 1st gear. Is there some secret for it to engage 1st gear after new install? Used a Barnett HD clutch new fiber and steel rings and HD springs..https://uploads.tapatalk-cdn.com/20170325/b8ebdc9027c5bbaa6ccbd4bd68d9c41a.jpghttps://uploads.tapatalk-cdn.com/20170325/acc7c042a2538c57b48217aa761faaab.jpg

Sent from my SAMSUNG-SM-G920A using Tapatalk

[greenhaze20]

If the idle is set to high it will bang into first gear. If you slow down the idle speed on the side of the carburetor it will engage smoothly.

[ladyzm18]

Greenhaze, it chatters when put in first, will engage sometimes mostly use 2nd. I assume previous owner bent this and it's affecting 1st gear.

Sent from my SAMSUNG-SM-G920A using Tapatalk

[ladyzm18]

https://uploads.tapatalk-cdn.com/20170326/6f6fca91e74e3ab26621f27a73bb05af.jpg

D

Sent from my SAMSUNG-SM-G920A using Tapatalk

[BigRedGrizzly]

Sounds like you may possibly have a bent shift fork within the transmission. [emoji30]

[greenhaze20]

Yea hate to say it but it's probably time to split the cases and take a look at the transmission. Also get a new arm, that looks bent, you may be wearing out the new clutch you put in.


Sent from my iPhone using Tapatalk

[ladyzm18]

Any members in california that want to rebuild engine for me?

Sent from my SAMSUNG-SM-G920A using Tapatalk