200x clutch issues HELP.... PLEASE

[Whisper7585]

I took the right side of my motor off to access the clutch..
The clutch basket is loose. It will slide in and out 1/8inch.
All the bolts are tight. Is that normal? If not how do I shim it so it don't slide anymore? TIA

[YTZ drew]

Some in and out play of the clutch basket is normal, but 1/8" is probably excessive. The bolts you see only hold the springs and the outer pressure plate on, they will have no effect on basket movement. The basket is retained by the inner pressure plate, which is held on by a large nut. If that nut came loose you'd have bigger issues. What made you take the clutch cover off in the first place?