250r exhaust pipe

[Banshee_killer]

I recently purchased an 1986 250r with a fully rebuilt engine (hot rod, wiseco,etc) for 1300. Anyway I was wondering if getting an aftermarket pipe is really worth it, like a fatty or dg? It has a dg slip on right now so I was wondering if it's worth the extra 150-250 dollars. Thank you

[Shawn Powell]

I recently purchased an 1986 250r with a fully rebuilt engine (hot rod, wiseco,etc) for 1300. Anyway I was wondering if getting an aftermarket pipe is really worth it, like a fatty or dg? It has a dg slip on right now so I was wondering if it's worth the extra 150-250 dollars. Thank you

Yes on the FMF. DG at least for my experience are just shiny noise makers. But a whole FMF system with get you more power and shift it depending on what silencer you go with. Had one an a LT500. Used the fatty pipe and the shorty silencer gave me more bottom end grunt. ( 2 stroke 500cc , top was FINE ) looked great lasted forever.


Sent from my iPhone using Tapatalk

[atc300r]

DG and FMF are decent pipes. If you can find one get an old school Bills,Bassani,Coffman,CT,Paul Turner ect,ect,ect.

[Banshee_killer]

Alright I'll look for used pipes, thank you guys for your help!

[yaegerb]

FMF/DG are a good improvement on an all stock motor. If you have any enhancements such as a free flow airbox, upgraded carb/reeds or porting I would call eddie at ESR and see about his ATC 5 pipe. Very good all around pipe.

http://www.eddie-sanders-racing.com/product_p/atc5%20pipe.htm

[russhud]

FMF/DG are a good improvement on an all stock motor. If you have any enhancements such as a free flow airbox, upgraded carb/reeds or porting I would call eddie at ESR and see about his ATC 5 pipe. Very good all around pipe.

http://www.eddie-sanders-racing.com/product_p/atc5%20pipe.htm

I can't seem to get anyone at ESR to answer the phone- are they still in business?

[yaegerb]

I can't seem to get anyone at ESR to answer the phone- are they still in business?

Yup, but Eddie runs the place by himself now, so he fab's, takes orders, builds, does everything. I hear its best to call around 10am west coast time.

[FLYB767]

I have a NEW Paul Turner Hi-Rev CHROME pipe i will sell you if you are interested.

[BOB MARLIN]

ESR pipe seems to be the gold standard out here in so cal. but very hard to find. You could also go BDT but it will cost you about 3/4 of what you got you trike for.

[Doug8765]

Paul turner


Sent from my iPhone using Tapatalk

[Doug8765]

Selveys


Sent from my iPhone using Tapatalk

[Tri-Z 250]

$150-200 isn't going to leave you much room for choices. You'll need to really keep you eyes glued for a deal. Your about half way on $cash if your looking to new race style pipe. Does it make a difference? No question, in race application with mod motors & carbs it's a must have. You trail ride the neighborhood take it out to RV parks with db regulations? Nothing wrong with stock. Just a silencer will increase flow and might be a good start for you.

[Doug8765]

Klemm research


Sent from my iPhone using Tapatalk