mcgyver331
10-02-2017, 09:36 PM
Well I got working on an old project again it has been 4 years in the making if that tells you how back burner I’m talkin.
I took a bw 200 swing arm, shoehorned it in to a 75 rd350 frame put new bearings, new jack shaft and all, put the bw 200 front end on and replaced the forks with 200x for front disc. Recently I made a 2 into 1 pipe and and installed an upswept expansion chamber.
After finding my clutch had stuck for sitting so long I decided to get a banshee set, I also got some bowl gaskets to stop the 42 yr old dried out gasket leak.
what a dam beast. Now to get a tank and modify it to fit the forks. Mine was so dented I just bashed in the rest to ride. But it’s a leaker.
https://image.ibb.co/fgJATw/BBB30595_DFED_4_FFD_9995_B3_AABEAC4_CC0.jpg
https://image.ibb.co/c5RKMG/02_C30010_5_E76_4250_A5_F7_2_C672_D71_CEAF.jpg
https://image.ibb.co/c9JoFb/01615_A5_E_053_E_4704_92_A4_A1824_CEA0825.jpg
https://image.ibb.co/nn961G/8765_D29_F_6_E81_4_E67_8963_648_DC1_A3_E49_A.jpg
https://image.ibb.co/jmfDgG/image.jpg
I took a bw 200 swing arm, shoehorned it in to a 75 rd350 frame put new bearings, new jack shaft and all, put the bw 200 front end on and replaced the forks with 200x for front disc. Recently I made a 2 into 1 pipe and and installed an upswept expansion chamber.
After finding my clutch had stuck for sitting so long I decided to get a banshee set, I also got some bowl gaskets to stop the 42 yr old dried out gasket leak.
what a dam beast. Now to get a tank and modify it to fit the forks. Mine was so dented I just bashed in the rest to ride. But it’s a leaker.
https://image.ibb.co/fgJATw/BBB30595_DFED_4_FFD_9995_B3_AABEAC4_CC0.jpg
https://image.ibb.co/c5RKMG/02_C30010_5_E76_4250_A5_F7_2_C672_D71_CEAF.jpg
https://image.ibb.co/c9JoFb/01615_A5_E_053_E_4704_92_A4_A1824_CEA0825.jpg
https://image.ibb.co/nn961G/8765_D29_F_6_E81_4_E67_8963_648_DC1_A3_E49_A.jpg
https://image.ibb.co/jmfDgG/image.jpg