PDA

View Full Version : Leckich tuning


spacerust
10-29-2017, 07:22 PM
I just bought what I was told an ‘82 250r and today I was going through and accessing what I want to do to it. I noticed this badge on the rear fender and not sure what it means. Then I was looking at the motor and found the motor identification and, to me, it doesn’t match up. Also, this may just be a sticker, but on the air box, it says Motion Pro. The spark arrestor also is from a Kawasaki. The PO told me it was from his Tecate, that he put it on there. https://uploads.tapatalk-cdn.com/20171029/fa72d1ec1b4f7670680b07da7bbbf1f2.jpgAny info on what Leckich Tuning is and the year of this motor?

https://uploads.tapatalk-cdn.com/20171029/9cf07dab2ea5f4754bbbe32d476008c2.jpghttps://uploads.tapatalk-cdn.com/20171029/e23a8e3a9393fa9bec3201a281c5d8a8.jpghttps://uploads.tapatalk-cdn.com/20171029/f1cb4a235710d11606813f3afdc8ed8e.jpg


Sent from my iPhone using Tapatalk
spacerust
10-29-2017, 07:42 PM
Here are pics of both sides of the motor.


Sent from my iPhone using Tapatalk
spacerust
10-29-2017, 07:43 PM
https://uploads.tapatalk-cdn.com/20171029/379055119cef6f42d859490ac35cf880.jpghttps://uploads.tapatalk-cdn.com/20171029/5cead997bd2e31069fb33c4ba2b4c6e2.jpg




Sent from my iPhone using Tapatalk
spacerust
10-29-2017, 08:07 PM
I noticed that too that it looks like someone spray painted it. I know the previous owner told me his brother raced dirt bikes in a California and he has had this 250r for seven years. I was going to get a hold of him to see if I can get any more info.


Sent from my iPhone using Tapatalk
yaegerb
10-29-2017, 09:49 PM
It’s a 210000 engine stamp. It’s an 82 250r motor.
spacerust
10-29-2017, 09:54 PM
I just went out to the garage and you are right. It is 210...the previous pic was deceiving (must have been the lighting). Any info on why it has a Leckich badge on the fenders?


Sent from my iPhone using Tapatalk
yaegerb
10-29-2017, 10:01 PM
Here’s some good write ups on Jerry.

http://www.pilotodyssey.com/PO/viewtopic.php?f=1&t=8837

He did some of his own castings. Only way to tell if he ported it is to open it up and look at the transfer tunnels and intake/exhaust ports.
spacerust
10-30-2017, 09:41 AM
I was reading about Jerry and his son Mike. They both seemed like good ole boys. I guess I am going to have to pop this open. I will also get a hold of the previous owner to see if I can get some additional info on this bike. I will post any info here, hopefully to add some history to our passions.