PDA

View Full Version : Let's see them 125's!



GageWallin
11-18-2017, 03:14 AM
Any 125s with rear suspension out there? Let's see your 125 projects!:beer:cool:

TrickShot
11-18-2017, 05:52 AM
Slowly getting my 86 going.
247634

67Sport
11-20-2017, 09:48 AM
My almost stock 125m. Cleanest trike I own. No real plans to modify it, just a nice old stocker.https://uploads.tapatalk-cdn.com/20171120/91bc4df661d2944d1b922651f53d9a3e.jpghttps://uploads.tapatalk-cdn.com/20171120/e3b4d0ec66b54b834a8413783cf13e0c.jpg

jonesjacob790
11-21-2017, 05:45 AM
awesome, looking very cool :D

atctim
11-21-2017, 11:37 AM
My brother's and my 1986 ATC125Ms.

https://scontent-lga3-1.xx.fbcdn.net/v/t1.0-9/10629864_10152338157527945_2420749492981546987_n.j pg?oh=28471d061386c02367c86c284586bfc0&oe=5A941E06

atc300r
11-21-2017, 01:26 PM
I wonder how well this 125 motor would fit in a 200x frame.
Any 125s with rear suspension out there? Let's see your 125 projects!:beer:cool:

atc300r
11-21-2017, 02:16 PM
I would build it for trail riding something different. If I was going to build a 125 racer I would use a cr 125 motor.
It will bolt right in pretty much. If trying to make a suspended 125 class racer I'd start with a pit bike though they have double the hp

schlepp29
11-21-2017, 02:40 PM
That's interesting dude, I wonder what a Daytona 190 would do in an s

schlepp29
11-21-2017, 02:42 PM
Whoops my bad, I thought you meant a lay down motor

schlepp29
11-21-2017, 05:57 PM
Sure would

GageWallin
11-24-2017, 09:24 AM
I wonder how well this 125 motor would fit in a 200x frame.

I have no idea, I'm new to trikes. I still have to experiment.

3 Wheel Drive
11-24-2017, 09:45 AM
Here’s my old 125, yea it’s got factory rear suspension!

https://youtu.be/XUjpstw2zts

barnett468
11-24-2017, 01:01 PM
I would build it for trail riding something different. If I was going to build a 125 racer I would use a cr 125 motor.

...and if you wanted to actually be unbeatable you should use a KX125 engine! :cool:


PREVIOUS KAWASAKI INTERNATIONAL R & D PROJECT ENGINEER AND ATV DEPARTMENT SUPERVISOR AND THE ONLY PERSON ON 3WW WITHOUT AN EDIT BUTTON OR A STAR :lock:

YTZ drew
11-27-2017, 10:02 PM
Just for the record, the upright cylinder 125M engine will not bolt into a 200X, nor anything else with an engine based off of CB100/125 architecture, ie: any atc185/200. The rear crankcase mounts are significantly wider on the upright cylinder atc125, and the 87-88 trx125 which shared the same engine. Trust me, I tried.