New members, welcome!

[Dr.Knuckle]

just picked up this atc. had a big red back in the day. I was told this was a 200 nothing else any info would be great. thanks. looking for head light and maybe seat. thanks again https://uploads.tapatalk-cdn.com/20171128/fcd5274e6200316d7aa22bbdfd2b4a4f.jpghttps://uploads.tapatalk-cdn.com/20171128/18a744c49a9e04fa831168834e538eaa.jpg

Sent from my SM-G930V using Tapatalk

[Jd110]

Looks good. Welcome!!
http://www.3wheelerworld.com/content.php/264-ATC200-ATC200M-and-ATC200S-Technical-Data

[Big G]

What's the displacement stamped on the engine?

[truckerlump]

just picked up this atc. had a big red back in the day. I was told this was a 200 nothing else any info would be great. thanks. looking for head light and maybe seat. thanks again https://uploads.tapatalk-cdn.com/20171128/fcd5274e6200316d7aa22bbdfd2b4a4f.jpghttps://uploads.tapatalk-cdn.com/20171128/18a744c49a9e04fa831168834e538eaa.jpg

Sent from my SM-G930V using Tapatalk200m I think you can research it by the vin

Sent from my SM-G955U using Tapatalk

[Big G]

It's not an M - doesn't have electric start. Either a 200 (plane jane) or 185S.

[Dr.Knuckle]

It's not an M - doesn't have electric start. Either a 200 (plane jane) or 185S.it's a plane Jane 200

Sent from my SM-G930V using Tapatalk

[schlepp29]

Looks like an 83?

[Big G]

Looks like an 83?

Yes, it's an '83. That was the only year they made the plane jane 200 with front suspension.

[Srogers05]

247989
Seen this old guy roll up to the bank in a 1984 Honda 200m, memories from my teenage years came back to me riding atc`s. I bought his bike a week later. Currently going through it making it my own, should be riding in the desert by the weekend.

[Jd110]

It's a bird....no it's a plane...lol
That's the name of my truck-'plain Jane'. You all have a name for your ride, right? Or am I weird? Never mind.

[Josh07]

Trying to figure out how to make a post. I have a suzuki 125 atl i was hoping to try to get some help on

[Josh07]

i Bought what I thought was going to be an easy project three wheeler for 100 dollars. Guy said has weak spark. Said not a problem. Brought it home popped off the recoil cover and Presto dirty coils pulled the fly wheel off shined everything up reinstalled all parts checked the spark. The spark is nice blue and I can here it snap when it fires. Found the carb needed cleaned not a problem I just wanna here it fire up shot a little ether down the hole cranked my heart out and nothing. Checked the timing timing looks dead nuts on. Compression is ok not the best but still blows my thumb off a little. Any suggestion something I'm missing. Got ok compression have spark and ether still a no start.

[schlepp29]

A friend and was working on my 200m with the Same symptoms and found that it was stuck rings. After keeping it turned over with electric start they finally got unstuck. Lol not a recommended way of fixing something but we got lucky. And I'm not saying that is the problem but that's what I ran into once.

[schlepp29]

And take a look at the valves to be sure

[Josh07]

I checked the valves on compression stroke TDC they were good. When I was turning the engine over to TDC I had my thumb over the spark plug hole and could hear air leaking from somewhere I guess that might be the stuck ring? So I hooked up my multi meter on the pulsar coil and was getting 156 ohms while turning over the engine don't know if that's good or bad. The spark is nice and blue but doesn't seem very big checked the gap gap is good on the spark plug. What are the purpose of the coils under the fly wheel is that just for lights or what? The pulsar coil runs off the outside of the flywheel

[schlepp29]

Good deal, I'll be honest I suck at electrical, lol

[Big G]

247989
Seen this old guy roll up to the bank in a 1984 Honda 200m, memories from my teenage years came back to me riding atc`s. I bought his bike a week later. Currently going through it making it my own, should be riding in the desert by the weekend.

Can't believe you guys are allowed to ride trikes on the streets down there. I'd have a police cruiser with cherries lit up behind me in no time if I tried that here in Canada.

[Josh07]

So....... I been over everything with this suzuki 125. new spark plug, valve gap good, timing is good and its getting good spark and my ether can is nice and full. I know its not good but i just want to hear it start. the only thing that is ify is the compression.,I don't have the manuel in front of me. Hypothetically speaking, say the it's supposed to be 120psi but your only putting out 30psi shouldn't it still pop, bang or atleast do something?

[Josh07]

Ran a compression check that turned out to be good. Had a brain fart, my timing is dead nuts on IF I wanted it to be 180 degrees out!!!! After work I'm going to set the timing fingers crossed it will run!