japhillips87
08-14-2018, 04:15 PM
I'm trying to revive my old 1985 ATC 200m but I can't seem to get a spark. It ran, albeit not very well, about 2 years ago and has been parked ever since. When I started tinkering with it, I noticed that the battery was installed backwards. The ignition switch was old so I replaced it and the starter solenoid was fried so i replaced it too. I have also replaced the spark plug, CDI box, and ignition coil. I tried to take the pulse generator cover off, but one of the phillips head screws stripped. I'm just not sure what to look for next.
As far as testing goes, I turn the key and press the start button while holding the spark plug threads against the cylinder head. When I do this, there is no spark. Any ideas?
As far as testing goes, I turn the key and press the start button while holding the spark plug threads against the cylinder head. When I do this, there is no spark. Any ideas?